Legion Scimitar Jetbikes - Part II

 

Some angels have wings. This one has a jetbike.

Managed over the course of a week to get some of the major colours blocked in on the jetbikes. This was mostly an exercise in airbrushing up to now, with the next steps switching to a normal brush to clean up a few details.

The red doesn't much explanation at this point, but regardless:

• 50/50 Dryad Bark / Mephiston Red base layer.
• Mephiston Red midtone.
• Evil Sunz Scarlet for the highlight.

The metals were nothing special either, but were actually done before the reds:

• Leadbelcher base layer.
• Deathshroud clear into shadowed areas.
• Iron Hands to "highlight" (it didn't really make much difference to me).
• Castellax Bronze lightly applied across the top engine cover.

The last step just gives some variation to the metal areas, acting as a very slight colour filter that adds some visual interest. After the matt varnish step I'll likely push it a little further from the silver tones with metallic glazing. I actually find the metallic paints quite effective at glazing, but it will need to be done later to restore that metal sheen.

The riders are being done at the same time, but the temporary handles attached for painting don't make them easy to add for photos just yet. I'm hoping to have them ready in time for the next update.

Painting the metal areas separately from the red panels and using an airbrush presented an interesting challenge: how to mask off pieces of the model, and which order to do them in? I ended up painting the metal areas first, reasoning it was easier to fix them up than try to re-paint red gradients and transitions. In hindsight, this was the correct choice. Masking off areas however, that took a bit more thought. First of all, let the metallics sit for at least 24 hours to ensure they're fully dry and cured, giving them maximum adherence to the model. Don't really want the masking medium to strip the paint off. To mask areas off, I ended up using very cheap branch blu-tac. It's not as flexible or sticky as branded, but that actually made it fit for purpose in this case: the cheap variant was pliable enough to cut to shape and press over areas, but also peeled off very easily later on. As an added benefit, I can re-use it for masking other models in the future as well.

I've decided to properly glue all the flying stands in, but not glue to the clear bases yet. The stand will always be used anyway, and I find it useful when holding the model for painting.

Next steps are to fix a few small areas that weren't masked properly, or accidentally masked off entirely, before adding edge highlights to the red panels and then sealing it all with a thin gloss varnish. The matt varnish step later seems to be dulling the edge highlights, so I'll likely make them a little bit stronger this time and see how it goes. I'm also toying with the idea of adding a black strip across the front of the jetbikes, similar to the Thunderhawk Gunship, but black trim and gold filigree are a contender as well. That's a decision for another day.

There are likely to be sporadic posts over the next weeks, and possibly rest of the year. I'll still be painting, but trying to give weekly updates will be giving way to the necessity of a more flexible timetable.

-- silly painter.