Friday, May 29, 2026

Sons of Horus MkVI Assault Squad - Part V

 

Changing the clip must be difficult.

Not a whole lot going on still with regards to painting (work + other responsibilities) but these models are getting really close to being done. Bases, varnish, final highlights mostly, although there might be more decals in selected places because why not.

The major change since last time is the metallics. Here are are few more spots of TMM Ancient Gold that I think work well with Sons of Horus more specialised troops and I think I'll continue with that going forward. The silver/steel/whatever details though are so far just:

  • Iron Warriors
  • Black Templar
  • Iron Warriors to pick out volumes again.

I wanted specifically to go back to a wash or contrast paint because of the speed here. It's not quite as smooth as layering up various glazes, but it's fast.

Cabling in places is Screamer Pink and orange (actually Rust Orange from TTC to replace my dried out Squig Orange) mixed in for a bit of "let's see what this does". I also used the orange on the ammo counter for the pistols, but I need to darken that down again with a red wash probably.

The other point of interest is actually using Basilicanum Grey to glaze over the excessive highlights on the jump packs. I think the edge highlights are still excessive, but it toned everything down and gave a very subtle colour shift to make the "black" more visually appealing.

Short post today.

-- silly painter


Sunday, May 17, 2026

Sons of Horus MkVI Assault Squad - Part IV

 

Overhead lights must be bright.

There are very likely going to be a few "not a whole lot done" posts in the near future because I can't get a whole lot done during the week right now. Far from being dismayed, it's simply a challenge to overcome and figure out how to keep the models moving forwards in the most efficient use of time as I can manage.

This is actually part of a broader discussion on painting motivation. I see many videos on how to paint fast, how to keep up motivation, and all of that - but the they all miss a very crucial point: humans aren't machines. Motivations change and what works one day might not work the next. Some days I feel like using a specific synthetic brush, other days a good kolinsky sable brush - and I'm using exactly the same paint for exactly the same task. Some days I want to paint metallics, others I just want to glaze and highlight volumes. Some days I just don't want to paint. Find what works for you on any given day.

The last couple of days I've been painting one part of each model at a time. Not all the metallics, but for example all the gun barrels of each in turn, then I might paint all the intake brackets on the jump packs, and so on. It's been keeping the sense of monotony at bay, and with the same paint I've been able to do one piece at a time whenever I get a few spare moments.

The metallics are going to be Iron Warriors covered with Black Templar as a base coat. This might not be as fancy as some of the dedicated layering I do, but it's fast and will give decent contrast around the details. I'll go back with Iron Warriors to neaten up later, and then it will probably be Iron Hands Steel for highlights after the varnishing stage (which shouldn't be too far off now).

Aged Metal (TTM) for the studs and some chainsword detailing gives some variety to the model - the shade for outlining, and later (post-varnish) I'll use the light version to highlight.

The black armour is an interesting story. I basically thinned down Dawnstone and shot it through an airbrush after masking the models appropriately. The masking worked, which was the main reason for this, but the use of Dawnstone was not the best. I should have at least mixed it with Corvus Black, or perhaps a dark blue. Dawnstone is too desaturated and gives too much of a broad, rounded volumetric highlight. I'll probably thin down Basilicanum Grey and glaze over it to knock back the stone look, though it might be better if I mixed in the barest hint of a blue for colour saturation.

The models are coming together nicely and I think I have all of the colour choices decided upon, so now it will just be a matter of following through with known steps to get them done. I'll be busy for a while however and no guarantees that such steps will happen quickly.

-- silly painter.


Tuesday, May 12, 2026

Eye of Horus

 

Eye is watching you

I've been having some work and health troubles and so no real painting of late, but I did manage to get out the oils again and paint up the Eye of Horus, symbol for the Sons of Horus.

Oil painting has some applications to miniature painting, at least in the style I'm adopting. I don't really paint oils in one go, but instead plan them and paint in stages. Taking this example the first steps were to paint in the background (a green or turquoise for Sons of Horus) and then the central eye insignia. Black would be overlaid on top later and it's generally better to paint from background to foreground. Even the eye itself was first a mix of red and orange, then when that was fully dry (cured) I went back and added blended in the highlights up to yellow in the middle.

The black was actually a mixture of black, burnt sienna, white, even cadmium red. I wanted some depth to the surrounding shape, which black alone wouldn't give, and what you see is purely playing around for 15 minutes in the one spare moment I had. I'm not happy with the result, I know I can do better, but I'm not entirely unhappy either. It's not just greys, it's not plain black, and I figured how to mix on the fly better.

Working with acrylics I get used to layering a lot. Here it's different to a degree because the layers take a very long time to dry. It's better to mix the base colours and apply them with a rough outline and then later go back in and blend things together.

When working with acrylics I tend to mix colours on the palette first and then glaze and layer them up on the model. Here I was mixing white into the "black" on the palette but then when applied it would mix with the wet paint and be barely noticeable. Of course. So I mixed it directly on the painting itself. Oils are brilliant with blending, but therein lies the trick: figuring out when, where, and what to blend. It's also great to lean into that to work with the colours and move them around while there's time.

The long curing time of oil paints is something I am very much appreciating. Yes it means I generally can't sit and paint from start to finish in one go (possible with oils for someone more experienced than I), but also it's possible to simply have multiple paintings on the go, switching between them each day.

Oils for miniature painting isn't really my thing, but oils on canvas most certainly is. It helps me to think of the colours in a new way which is applicable to any sort of artistic endeavour.

-- silly painter.