Sunday, June 28, 2026

Custodian Wardens - Part IV

 

No, the axe is not for chopping firewood.

It's taken some time to do not much visibly on account of very little time to paint, and what time there has been was spent getting every other model in the squad to the same level. Nearly. Unbelievably, I'm still not done with armour yet either.

Mostly highlighted as described before, I'm still going to pick out some areas with a heavily thinned Canoptek Alloy. This is a very strong paint normally and I don't want it to overpower what's there, but the detailing isn't standing out quite as much as I would like just yet. I will need to be very careful to not ruin everything.

The helmet lenses are really simple:

  • Wazdakka Red
  • Rust Orange (TTC) within the red.
  • Fire Dragon Bright as a final highlight.

I did go back in with a black to outline where the red went outside the edges, but that wasn't always necessary. I didn't bother with white reflection dots - the lenses are barely visible as it is, anything more isn't really adding anything to the model.

The faceplate is simply Iron Warriors covered with Iron Hands Steel. I wanted a very polished look and didn't bother with any fancy gradients or shading. Other steel / silver areas have Doom Metal (TTC) for shading, but I'll reserve more extreme highlight points for the weapon most likely.

Finally (this is a short post) Flesh Tearers Red was used to fill in the gaps on the pauldrons and introduce more colour to break up the monotony there. I thinned it and used a couple of layers to build it up. I'm not sure it worked quite as nicely as if I'd used something else base and layer up highlight points, but I wanted to try something different and it fulfils the original purpose.

There are still a few details to go before I turn my attention to the weapons, but they are coming along nicely. I just hope everything else begins to calm down enough to let me finish these models without too much more delay.

-- silly painter



Tuesday, June 16, 2026

Custodian Wardens - Part III

 

Seen some shit.

This is a shorter post about more than just the Custodian Wardens, but concerns faces in general. There's only one model in the set that I've assembled without a helmet, and that was purely because I thought it suited the silhouette better.

To start with, the sculpt lends itself to older white haired look. It really does for some reason - it just has that grizzled veteran vibe. Obviously the Custodian Guard do age, so I would assume this guy has been at it for a very long time and has witnessed a lot. He's also very well groomed.

Painting the face actually used comparatively few paints. I started off with Night Lords Blue but didn't exactly go for complete coverage. A little patchy in areas is ok as it will give a more natural look in the end. Barak-Nar Burgundy was next, leaving the previous colour in the recessed areas and just kind of sketching out the shapes. These colours were chosen for no other reason than they were on the palette at the time, but that's again something that gives a more natural look: not every person has exactly the same skin tone, and it's the variation in models that make them look realistic.

Barbarian Brawn and Dwarven Flesh, both TTC paints, were then used to build up the skin tones by mixing in previous colours and highlighting up as I went along. The deeper recesses and lower parts of the face predominantly used Night Lords Blue mixed in to give colder shadows, while Barak-Nar Burgundy faded out from there and was also more apparent to the sides of the head. Final highlights are pure Dwarven Flesh, glazed into place: nose, upper cheeks, and the forehead. I made a conscious choice to keep the front of the face brighter and this really sells the look. It helps define the shape of the head and keep attention where it should be.

The beard and hair is Trooper White, another TTC paint, which is also the "whites" of the eyes. The iris is just Night Lords Blue, and I did not even try to put in a black pupil. I did mix in some of the blue and burgundy into the white for initial hair colouring, moving more to the blue later. I used very little pure Trooper White for the hair; (barely) a hint of another colour is sufficient to make it look more natural.

I stopped about there. I could make the skin tone brighter, but that might clash with the hair and the skin was looking sufficiently leathery by this stage. I just added eyebrows then blue tinted cabling around the head and glued it in place.

Guardian Spear with built-in boltgun, but still wants to use a knife.

This model is not really fully assembled quite yet. The pauldrons and cape are just resting in place right now so that I can easily access some of the still visible parts of the model, but I do get a good feel of how everything will look in the end - and I'm happy with how that's going. I still need to highlight the armour on this model (and most of the others). Next models I'm definitely not going to go quite this hardcore on.

-- silly painter.


Thursday, June 11, 2026

Custodian Wardens - Part II

 

Wonder if he washes his own cloak.

While the armour still hasn't received final highlights, I have managed to figure out the other major piece of the model: the cape / cloak / whatever. It took me a while to come up with an idea for that, and actually I had something in mind when I saw something similar from Trovarion.

The idea is that while it can go vibrant, it shouldn't look reflective. The shadows are are cooler and tend towards blue or purple, where the highlights are the warmer tones of a red. This gives contrast and readability while still looking softer, possibly like velvet. I did not want to use simply darker red or black for shadows and nor did I think a wash was appropriate. In the end it was just three paints:

  • Barak-Nar Burgundy base coat.
  • Night Lords Blue / Barak-Nar Burgundy (1:1) in the shadowed areas, basically anything facing down. The ratios aren't exact: more blue in the deeper recesses, more burgundy glazed into lighter areas.
  • Mephiston Red build up for the highlights. Mixing this with a hint of Barak-Nar Burgundy helps transition in places to the purer red which is mostly reserved for upwards facing surfaces higher up.

I'm not sure if a brighter red is suitable or not and so haven't added anything more quite yet. I can always do that later once the helmet is in place and the armour highlighted more.

Rather obviously the model is glued to a base now. I haven't pinned the model in place but something tells me I should have. I'll think about it if they ever come off. Ideally I should have aligned the legs and drilled holes before putting the topper in place but it was too late to do that by the time I'd thought of it. Maybe next time.

The leather braces I straight up stole from a Duncan Rhodes video:

  • Doombull Brown
  • Nuln Oil
  • Doombull Brown glazed into some volume highlights again.
  • Rust Orange TTC (or Squig Orange from Citadel, but mine had all dried up) to edge highlight.

Very simple and yet effective. The weapon grips were similar:

  • Doombull Brown
  • Carroburg Crimson
  • Rust Orange to highlight
  • Doombull Brown glazed over the highlights to knock them back slightly.

I still have the rest of the squad to complete all of these steps for and so I suspect the next update might take another week or two. Everything is just slow going right now. At least the hard part is over and I think I can just paint without thinking of how to do each little detail.

-- silly painter.



Wednesday, June 3, 2026

Sons of Horus MkVI Assault Squad - Part VI (Showcase)

 

Assemble!

Surprisingly shorter time to finish these models, but they now done. Matt varnished, highlighted, based.

The first piece of trivia is the edge highlights are actually the same colour as the final volume highlights through the airbrush, and so they're not very visible. I had considered mixing Gauss Blaster Green for something stronger, but the slightly satin finish of Citadel (or Warhammer) paints is enough and I didn't want the colour shift with a stronger edge highlight. Basically I think these models look just fine without much in the way of edge highlights at all.

The black turned out alright in the end. I did tone back the jump packs a good deal and the matt varnish softened things further. I think I like Basilicanum Grey over Dawnstone and might explore that with the airbrush at some future point. The weapons weren't to my liking with the same visuals, so I might just stick with something a little more subtle than Dawnstone in future, at least for the airbrushing.

Overall, despite the minimal effort and intentional limiting of colour choices, I think these turned out ok. That's partially the colour scheme itself: blue, green, turquoise, are just seemingly much easier to work with compared to reds. The sculpts lend themselves very well to airbrushing too, with the large and softly curved surfaces and relatively sparse detail.

Once I had the colours and paints picked out, everything went fairly quick. Painting in sections with a single colour throughout the day helped a lot, particularly with the metallics. It still goes quickly to get the basic armour, then very slowly filling in details, then suddenly very quick again to finalise and finish each model. It might only be tabletop standard, but I'd be proud to have a whole army painted to this level.

Onwards to the next batch of models.

-- silly painter.