Wednesday, April 26, 2023

Blood Angels Contemptor - Part II

 

Un-armed but still dangerous.

Back again and returning to incredibly slow painting because reasons. It's picking up, and I really want these dreadnoughts finished, so maybe in the next week I'll get a lot more progress done. Much of the most difficult decisions have been made on them however, so it will hopefully feel like going downhill from here on - but I guess I'll see!

Strangely one of the more difficult choices that really delayed everything was trying to figure out just what would be painted in metallics. There's no easy separation in some areas, and even now I've just kind of decided to leave some parts dark and hopefully not draw the eye to them. Also need to do something about that left leg.

I ended up varnishing this model before painting on any metallics, just to see how well it would go. My Leadbelcher is definitely the main issue, it's become like a gel and won't cover properly. Iron Warriors works more effectively, so I'll use that for now - I still don't see that much difference compared to Leadbelcher anyway, and after a wash they'll probably be even closer. This bodes well for me, because I still like how I have that moment to correct mistakes with a gloss varnish.

Here I've added recess shading, Carroburg Crimson of course, and again the gloss varnish helps with that. I've also done some edge highlighting, although the reflective nature of the varnish kind of overwhelms that in the photo. I put a lot more effort into keeping highlights matching the general volume highlights: Mephiston Red on the darker areas, Evil Sunz Scarlet on the lighter areas, mixing in Wild Rider Red for brighter edges. I also like to paint Wild Rider Red, then glaze over with Evil Sunz Scarlet at this stage - it keeps the edge highlighting more red than orange, and leaves pure Wild Rider Red for later when the matt varnish has been applied and I can see which areas need to "pop" a little more.

From here the plan is to finish doing the above for the arms, then move onto the head and metallics again. Just enough that I can then properly glue the torso plate in place and paint enough of that to then be able to glue the arms into position. Somewhere along the way I'll also play with battle damage - that will be Rhinox Hide mixed with black for deeper scoring probably, and use the reds listed above to add chipping as necessary.

While painting this particular dreadnought, I've also been moving forwards with the Blood Angels MkIV Assault Squad. Nothing with too much focus, more of a "while I have these paints out" kind of thing.

The current count is now down to 12, as I've ordered another dreadnought while they're still in stock (Blood Angels Librarian), and will possibly get more Blood Angels Assault Terminators when they're back in stock too. I'll have to hold off on 10th Edition for a little while, but that might not be a bad thing - I'll get the more flexible kits later on instead.

-- silly painter.


Tuesday, April 11, 2023

Ancient Rylanor - Part II

 

Favourite band: Deep Purple

Painting has been very slow going of late, and will continue to be that way for another couple of weeks (because reasons), but that doesn't mean I've done nothing. I've done a fair amount of airbrushing and preparation, including some purples for my take on Ancient Rylanor. The major problem is that I forget exactly what I did with the airbrushing - so what follows is a rough guide, but might not be entirely accurate.

I had mixed a blue (Night Lords Blue) into Chemos Purple as a base coat, and then straight Chemos Purple as a mid-tone. Genestealer Purple was then used to highlight, with then a bit of white mixed into that as a final more extreme highlight. Most of this was covered long ago when doing a test model for the third Legion, so I knew roughly how it might turn out, but with larger models like a dreadnought there are some differences.

One of the changes I've attempted here is to actually highlight bottom areas of the more vertical planes, which sort of helps the eye read the shape. Although it's a mostly vertical plane, there's slightly more area facing up at the bottom usually, so highlighting that helps give volume; at least that's theory behind it all, but mostly it just looks cool. The idea stemmed from a youtube video (Eric's Hobby Workshop I think, one on tanks) and so this seemed like a good place to explore how I highlight. Strangely enough, this is still actually how I highlight Space Marines now anyway.

One thing I did forget to mention was a kind of white Zenithal highlight that was done after the black primer. The intent was not for highlights at all, and nothing of that stage shows through, but it does give a good reference of where areas might be more naturally highlighted, and definitely helps pick out detail on a model. I do this regularly with more complex models now: heavily thinned white over the primer simply to help make the details more readable while I paint.

All told I'm quite happy with how the airbrushing turned out on this model. Purple seems to lend itself rather well to airbrushing and highlighting in general, perhaps because it's easy to work up from a dark blue to a nearly white all while maintaining readability as purple. There's likely a very good colour theory reason why this is the case, but I'm not recovered enough to confirm some ideas on that.

One of the larger pauses in painting came next simply because I didn't feel like doing it. It was a real struggle to get through, not really sure why, but the base metallic silver is just Iron Warrior. I will be comparing it against Leadbelcher later on to see which is "darker", but Iron Warrior just seems to have a slight amount of purple in the mix so seemed more natural to go with. I wanted to get this done before any varnish just because metallics over varnish aren't always the most pleasant of experiences and I'm hoping this will work better in future. It's tricky however because I do like to varnish at the end of airbrushing to seal everything in and help prevent chipping or rubbing off, and I had to be extra careful in trying to avoid mistakes.

After enough areas were covered with Iron Warrior for me to be happy with I then of course added a gloss varnish. This will help shades later, which I'm hoping will allow acrylic shades to act similarly to the oil shading done on the recent Titanicus models. There is one new approach to this varnish stage however: the size of the airbrush nozzle. Previously I used a larger nozzle because faster coverage, but sometimes it also meant a far too thick layer was applied. This time I used a much smaller (0.2mm) nozzle and some more distance for a finer and thinner spray over the model. This seemed to work really well, and I'm wondering if a thinner gloss layer will help metallic paint coverage, so another dreadnought has that ready to be tested soon.

Going forward on this model there is already the start of some Druchii Violet recess shading, although I might also use Drakenhof Nightshade in the deeper shadowed areas. I still want to do edge highlighting with Dechala Lilac as well, probably before a later matt varnish stage as I think it will still show through and I can always add more again later if it doesn't. Not sure how long it will take me to do all that, and I strongly suspect the new Dante model will land before then, but hopefully in a couple of weeks I can make some real progress.

-- silly painter.


Thursday, March 30, 2023

Cerastus Knight (Showcase)

 

Born to the purple.

Having recently completed one of the Cerastus Knights in the box, and having the other assembled, not much motivation was required to try and quickly get the other done. I was debating whether the entire force would belong to the same battle group, but that really only makes sense if I'm playing it against some opponent. I don't play the games so I decided a different colour scheme would be far more interesting - and besides which, having opposing forces would help if there was someone interested in playing but didn't have models of their own.

I've gone for a rendition of Legio Mortis in this case. Officially they're black and red, but I always felt like the artwork tended more towards dark purple and red (specifically on the very dark pink side of red). These colour invoke regal imagery, and yet keeps the model dark (one could almost say grim dark).

The purple is Naggaroth Night, shaded down to black and with no real highlights to speak of. 

The red is more complicated and I can't actually remember which base colour I started from. It was either Gal Vorbak Red or a 1:1 mix of Dryad Bark and Mephiston Red. Either way it was then highlighted with Mephiston Red, and edged with Wazdakka Red. This was heavily shaded down with a black oil wash.

The same oil wash was used everywhere else and then removed with a cotton bud dampened with odourless mineral spirits, exactly as was done on the previous model. I'm actually wonder now, despite the excellent result it gives, if similar would just be done with Nuln Oil (Gloss), or any shade that's given low surface tension. I varnish it later anyway, so any gloss appearance would be removed well before the Ironbreaker drybrushing step. I will consider this in future.

To balance out the dark reds and purples I opted for an almost fluorescent green on the "eyes". Dots of Dorn Yellow later covered with Hexwraith Flame is all that needed - and the latter being applied over a yellow works extremely well. If I paint Necrons again then that's probably the step that I'll use for at least some of the green glow on their weapons.

There's not too much else to really say other than intentionally I kept some areas less clean and crisp than my usual painting style. The model is dark, looks slightly unmaintained, and is quite possibly going mad - all of which fits the storyline for Legio Mortis. The downside is that while thematically it very much fits, it also feels like I've done a relatively messy job of the whole model. I'm trying very hard not to care however, as it's still another model finished.

The tally in total now stands at 14 models that I can buy. There are some things I definitely would like to get, but I'll hold off longer just to see if maybe I can get that number a little bit higher first.

-- silly painter.

 

Imperial Fist Contemptor - Part II

Yellow!

Yellow is an interesting colour. I have experiments on Imperial Fist models from before, and while they worked out well enough I wanted to try the approach of filtering yellow on top of other paints to see what I could make of it.

It did not work.

To look at why, first consider that it's rare to get "pure" colours - pure yellow, red, blue. Some colours are very close (Mephiston Red for example is very red, without too much deviation in the direction of purple or orange), but yellow pigments are seemingly not the best at this. Phallanx Yellow is actually closer to "bright yellow with a hint of green". Averland Sunset is a "dull yellow with a hint of orange".

The idea was to undercoat with red, then zenithal highlight with white, and then cover with Phallanx Yellow. The red areas would turn more orange, the white would give a brighter yellow for highlights. I strongly suspect a strong pink undercoat would have worked better, pulling the result further into orange rather than just the weak yellow it turned out as. The highlights worked ok, but really stood out as shifting more towards green.

The latter issue I could work with: I wanted the upper surfaces to be hinted at from sky reflections, which might give that subtle yellow colour shift, and the ground shadows and reflections being warmer tones and giving more of an orange. I decided to go with that and try add more depth by using Angron Red (Clear), but made the double mistake of not waiting for previous layers to dry first, and applying it too heavily. The result was far more fluid than I intended and pooled improperly on the model.

At this point I could simply have stripped the model of paint entirely and started again, but I rolled with it and decided to see if I could recover the painting with a brush and weathering. Firstly I mashed Averland Sunset into select areas - and yes, mash is the correct verb to use. It wasn't drybrushing, it was more like putting some paint on and then mashing the paintbrush around to kind of smear the colour out. If done quickly enough, and occasionally mixed with Phallanx Yellow, then actually it's a very fast approach at blending. The trick really is to use a heavy hand and move fast - don't feather the paint, smear it like butter instead. Copious amounts of this restored some kind of yellow gradient to the overall miniature, covered up some of the worst mistakes, and was just enough to work with.

Next steps are weathering, something I'm not that good at. I don't normally do weathering, but the large panels with hard edges lends itself nicely on these dreadnoughts. Stormvermin Fur, some black, and some edging of Dorn Yellow or Phalanx Yellow gives plenty of scratches on the armour, hides more mistakes, and still fits with the feel of Imperial Fists.

Decals have been added to further give visual interest, but I didn't varnish over the surfaces first. The decal softener I used therefore reactivated some of the paint (the Angron Red clear in particular) and messed up more areas. Back to weathering to fix that. One decal even has a pink tint to it in the white areas, which again will need to be fixed later on. I've done the decals now (or at least most of them) so that weathering is applied over the top of them, helping to further incorporate their design into the rest of the model.

Next time I think I'll just go with the more traditional base / layer / highlight / edge highlight when airbrushing Imperial Fists!

I haven't rushed to coat the model in a varnish yet, which is typically my next step before applying shades / panel lining, explicitly so that I could do the weathering. I've noticed that airbrush paints (or at least the Air range from Citadel) rub off easily, especially with a stiff bristled brush. This isn't the best for handling models, but when adding realistic weathering then it's actually very useful - I simply attack with a suitably old brush and the result guides where to paint scratches, dints, and dents. It gives a very natural result because it is natural - it's a result of normal wear and tear.

I'm confident that the model has now been recovered enough that I have a solid base to work from. It's by no means anywhere near finished, but I can at least start to visualise better what it will look like.

-- silly painter


Sunday, March 26, 2023

Legion Scimitar Jetbikes - Part IV (Showcase)

 

Not the most subtle of attack bikes.

After some considerable time spent in the background, the scimitar jetbikes are finally finished. While I'm overall happy with the end result, there are a few things I might change in future relating to the colour scheme - but even so, getting these painted up allowed me to learn a lot.

There is no weathering on these models. In all honesty, yes it would look very nice, but adding scratches, chips, etc, is just going to take far too much effort at this point. In miniatures I find that weathering is not so much about realism, but instead helps to break up large and otherwise boring surfaces - and I tried instead to use colour gradients and some interesting decals for that purpose. If I did want to add anything it would be some chips and scratches along the front and leading edges to show them powering through debris, smoke, and the odd bit of enemy fire.

All the main weapons are magnetised. I couldn't decide which one would look better at the start and so just painted all of the options. The plasma gun is a little different though, because that extra glow from the charging coils just didn't seem to fit and so I painted them copper instead. I figure it would heat up from whatever material it is and that's where the glow comes from - obviously there's better cooling on a jetbike whizzing through the air so it would need to be a really powerful shot before those coils start glowing. As for which weapon I prefer, I it would be either the volkite or the heavy bolter.

As a small aside, when painting the weapons I did all twelve (the meltaguns are not shown here) at once, and it's here that a wet palette really helped. I could just set out the paints and then switch between them as I went without having to stop and change paints out. The black areas I actually did in semi-reverse: edge highlights, then glazed/blended volume highlights, blended in that with the dark grey that is Corvus Black, and then shaded in and outlined with a deeper black. It turned out well enough, even if I was attempting to rush by that point - I just wanted the models finished!

The decals are great. They really add some character to the bikes. I think I'll be trying to use more of those with vehicles in the future, and they do give an excellent foundation to work from for freehand. Just another tool in the box, as the saying goes.

Random notes:

  • Dorn Yellow, then Blood Angels Red gives a very simple and effective glow.
  • Baharroth Blue, then Asurmen Blue, works wonders for blue lighting. White Scar can be used for extra brightness in the middle.
  • Glazing metalllic colours is extremely underrated. Using any of the metallics over a basic silver gives excellent results, and was used on the engine cover here.
  • Edge highlights after the final varnish step really helps outline pieces and make the red seem more vibrant.

Final note on these models relates to their storage. I'm not yet sure how it will go, but a solution to not wanting to drill magnet holes into clear bases is to create a sort of magnetic clamp to hold them down. I've done this by using green-stuff and superglue to attach magnets to popsticks - the height should be just enough to hold the bases down and stop the models sliding around. Two of these "clamps" per model (one each side of the stand). If it works well enough then I might use that as standard for anything with a flying base.

-- silly painter.


Saturday, March 18, 2023

Cerastus Knight (Showcase)

 

Pilot's favourite game: poker.

Sometimes I'm motivated to paint a particular model that I hadn't planned on that day or week. This is one of those occasions. I've actually had a couple of Titanicus scale Cerastus Knights assembled for quite some time now, and I wanted to test out a smaller nozzle on one of my airbrushes. I just wanted to see what level of control I could achieve, what limits of painting parts there would be. The Cerastus Knights were already painted with some metallic paints, so trying to get just the armour panels seemed like the ideal practice.

I followed the same scheme as used with previous Knights, but in this case I went too heavy with the second highlight layer and it just made everything a brighter blue-grey. A mistake, but not a terrible one because it makes this model stand out a little bit more. I just need to remember to mix the paints a little next time and keep some of the base layer showing.

Another change this time around was that when looking over the whole model I decided that it was both very detailed, but also heavily oriented towards metals. Instead of trying to pick out tiny details and then later add weathering I decided to give an oil wash another go. Before I had used them for panel lining, but this time I thought I'd wash the entire model and then remove the excess. I have to admit, this worked brilliantly: recesses are darkened which helps with light/dark contrast to read the model, and the use of a cotton bud to remove excess from larger panel areas naturally leaves behind some smudging and smearing. This fit the theme perfectly and I was pleased with the results.

Following on with experimentation I drybrushed over the metal areas with Ironbreaker. Drybrush is perhaps not the best term, but it does help explain the reduced level of paint in the brush's bristles and the motion used to apply paint to upper surfaces. There are some areas that I considered too detailed for this approach, but they're very few and easily fixed up later with a "normal" approach.

Much of the rest is as it's seen. I used Screaming Bell on the shield and the lance to help them stand out from the armour trim, and actually used less black armour than on previous Knights. Shadows on the ground is a continued theme to help represent some impression of scale, though I would like something else there - street cones, a lamp, something. Perhaps on later models I can do that, which will give these ones the same feel through association when standing together.

The base has one small addition that was a bit of fun: an explosion crater. It was make by prodding Astrogranite into a small circular mound, smoothing away the outside edges and then later painting in various browns. Nothing too fancy, but it definitely adds character. A character that some people could do without in the real world, sadly.

On the running tally I'm not at 12 models that I can allow myself to buy.

-- silly painter.


Blood Angels Contemptor - Part I

 

I see a black model and I want it painted red.

The last of the my plastic Contemptor Dreadnoughts (for now at least) is assembled and re-posed. The adjustments made are rather more progressive than previous attempts, but also more straight forward. I've purposefully taken a photo after priming so that it can be seen how it might look when painted and more cohesive rather than all the different putty and plastic colours confusing the imagination.

Right off the bat I'll admit there is more that could have been done to this model. I didn't change the position of the torso relative to the "hips", so it looks kind of weird when viewed straight on. I debated this for a while before deciding that watching a massive mechanical monster charging was bound to look strange to begin with, and I didn't want to spend half the year perfecting the pose and not painting it.

This charging Contemptor will be paired against the original Sons of Horus I painted up. It was always my intention to have that be part of a duel, although given the defensive stance of the Sons of the Horus combatant, the Blood Angels clearly have the upper hand in this fight.

As usual the most difficult part of everything is the left thigh. I had to completely rebuild that, and after painting it will show. I think I've done a better job than last time, but there's still a ways to go. When using putty I've determined a few aspects that definitely help:

  • Build up one layer and let it completely cure before adding any further layers.
  • Don't be afraid to mix layers of milliput and green-stuff. The latter seems to adhere better to the model, where the former gives better detail.
  • Put putty into a sealable bag, pushing out as much air as possible, and keep it in the freezer. I learned that one from Juan Hidalgo's Youtube videos (seriously, go check them out). It makes it so much easier to keep going whenever there's free time, rather than needing to mix new putty every session. Not sure where he learned it from, but that's where I found out about this trick.

The right arm is also slightly readjusted from normal to allow the power fist to be used (the upper arm was originally for an assault cannon) and to bend it in towards the torso more. This gives a better running pose for very little effort. The other arm was entirely untouched.

The right leg is angled slightly different against the body, and the "toe" was cut and carved back to give give the "foot" more of a bend and impression of force being applied as part of running movement. Actually this was more difficult than it should have been, but well worth the effort to sell the idea of motion.

My original thought was to have the left leg raised slightly into the air. That really did sell the idea of momentum, but I ended up abandoning that when I couldn't get the miniature to stay properly on the base. It was simply too heavy. So instead I had to build up rubble and rocks to get both feet touching the ground. A minor annoyance really, but these models are more about learning and having fun rather than entering into competitions so it's not all that bad. I also had to pin both feet in place - the connection points to the base weren't large enough for plastic glue to hold it, so out came the paperclips and drill bits.

The head I could have left alone, but with so many spare helmets I decided to add something distinctly Blood Angels. A normal marine helmet is smaller than a Contemptor "head", but I figure it probably doesn't contain anything more than sensors and input feeds to the actual Space Marine entombed within the body anyway. I could have bulked out the helmet more, but really I could also just be more clever with painting to not draw attention to size differences to other models.

And there we have it. Three Contemptor Dreadnoughts now awaiting initial airbrush work as the Year of the Dreadnought continues.

-- silly painter.