Sunday, October 11, 2020

Assault Intercessor Death Company - Part V

Quickly, run perpendicular to the enemy!

Abso-fraggin-lutely!

Stand still, I want to hit you with my chainsword.

And done. There could be a little more work on the base to make it more interesting, but I mostly just can't be bothered now. It's been a bit of a struggle to finish these guys actually; thinking over it, each Death Company ends up quite unique, and so painting each one feels like a character in their own right, naturally taking more effort and care each.

For painting, nothing really new to speak of, no new colours that haven't been tried before. I do like how the base and chestplate tie together, but don't like how my Windsor&Newton brush decided to split while trying to write out some words. I'm not going back over it now, but have to look at why that brush is doing so. Frustrating to say the least.

I've bought another Assault Intercessor, so this squad of Death Company will grow soon enough.

-- silly painter.


Saturday, October 10, 2020

Assault Intercessor Death Company - Part IV

Here, catch.

A brief extra today just to take notes on what I'd actually done. They're not yet finished, but really aren't very far off now.

  • The chestplate winged skull:
  • Morghast Bone
  • Skeleton Horde Contrast
  • Agrax Earthshade in the deeper recessed areas to really make it stand out more. A little of this was needed at the end to fix some mistakes too.
  • Ushabti Bone along the edges
  • Screaming Skull as final edge highlight, mostly on the tips of the "feathers".

The engine of the chainsword is taken from Lieutenant Tolmeron's power sword hilt:

  • Screaming Bell
  • Reikland Fleshshade Gloss
  • Hashut Copper as highlight.
  • Fulgurite Copper as final edge highlight

The chapter badge:

  • Celestra Grey. Two thin coats to get a nice solid colour.
  • Blue Horror edge paint to give a hint of blue.
  • Ulthuan Grey, focusing on the more prominent areas.

Note that the model pictured here does not have a blood drop gemstone in the chapter badge. This is intentional: as a full chapter badge is black, so the Death Company wear white. Where there's something to set the gemstone into, I will paint that in the usual red.

-- silly painter.


Friday, October 9, 2020

Assault Intercessor Death Company - Part III

Goblet and halo on the backpack. Why? Because he can.
 

Fully assembled now, I'm starting to pick back up the pace with painting these Death Company. None of the red has been highlighted yet, but the outline of the red crosses on the armour has been done. These will be brightened to make them stand out more.

The metallics are mostly done for this phase, and I'll come back to them after the varnish spray. I've used the gloss shades this time around because the base was already quite dark (Iron Hands Steel) and I didn't want to push it further. The gold is Balthasar Gold with Cryptek Armourshade Gloss just to see how it would look. The shade has a slightly red hue to it, and I've been looking for an excuse to see how it goes with the various golds.

Back in black.

 The holster is another new experiment with the Contrast range.

  • Zandri Dust over the leather areas.
  • Screaming Skull to add scratches, creases, and general wear along the edges.
  • Gore Grunta Fur over the whole area. It was applied a little too heavily in this case.
  • Agrax Earthshade around some recessed areas, or to darken as necessary.

I'm not entirely convinced that Gore Grunta Fur was the right choice, but I don't have much of the Contrast range and so it was the best choice at the time. It should have been applied just a little thinner however. The Screaming Skull doesn't show through particularly much either, so might need something a bit brighter in future. Still, while this might not work against full red armour, here it's better than the normal brown I've been using.

The purple gems on the right pauldron I was going to keep mostly as purple, but may try to highlight to a red just for something different.

-- silly painter.

 

Saturday, October 3, 2020

Skeletons

Possibly one used to be an adventurer, before he took an arrow to the head.

 

These skeletons are the beginning of a side project that I've been planning for some time, which is to build stand-in models for the Hero Quest board game. The ultimate goal is to recreate the entire game, including the board and furniture, so the models are meant to be played with. For that reason they are not in any way intended to be up to my normal standard: I'm expecting these models to be roughly handled and occasionally damaged.

 The skeletons are done mostly with contrast and metallic paints. The actual bone was rather simple:

  • Black primer, just because it's excellent as a primer.
  • Wraithbone spray, two coats to try get good coverage.
  • Skeleton Horde from the Contrast range.
  • Morghast Bone to fix any areas that don't look quite right. This is mostly to highlight something, or smooth over where Skeleton Horde didn't quite dry nicely enough. It's virtually identical to the raised areas after the Contrast paint stage, which is a nice piece of information to remember.

The eyes were simply Corax White and Aethermatic Blue. It didn't quite give the appearance I wanted; a more purple colour would have fit better.

Most cloth was covered in Nighthaunt Gloom, wood was covered in Wyldwood, and metals are a combination of various paints - there's no real recipe there, it's just play with them and try get some rust effects with washes and different metal tones.

For a lazy approach to wood grain, particularly on the shields, a hack is to first prime the shield black like usual, and then use one coat of Wraithbone base paint, applied by keeping brush strokes in one direction and making it very uneven and streaky. When Wyldwood is applied over the top, the streaks of the base paint will come through. With a little practice it can be fast and doesn't just look like a sloppy paint job.

The bases were Astrogranite, thinned with water Wyldwood, and some Hoeth Blue drybrushed around the out edge. I'm not actually sure if I won't be later using clear bases anyway, so no thought went into this process - it was mostly that I wanted to see how it would look (result: it looks bad, but at least I know that now).

The varnish spray at the end has also muted the colours quite a lot. Too much actually, though at least with undead skeleton warriors this is somewhat fitting.

Painting these models did allow me to experiment with Contrast paints some more, and basically play around without caring to be neat or paint to a high standard. Even so, the Tyranids were simpler to paint, and came out looking better, in that sense these skeletons were a bit of a failure.

-- silly painter.


Wednesday, September 23, 2020

Assault Intercessor Death Company - Part II

Death Company Primaris are all the Rage now.

 Just a small update on Assault Intercessor Death Company progress, now that there has been a little progress. The photo doesn't really show the effort put into the black - my own fault for the lighting and wanting a deeper black to the armour.

The problem with black is that it doesn't highlight well. Greys can be used, but then it's mixing two of the most troublesome colours: white and black. This is why there's often a little blue or purple added, just to help those transitions. I didn't want that, so I'm stuck with trying to be difficult.

Something that is helping is sharper edge highlights with Dawnstone. I've been moving away from such things, but it's really needed in this case to outline and give definition to the model. So if nothing else, I've learned that for black, sharp edge highlights matter.

In the past I've done all the blood drop symbols as red, and that will be the case on the model shown, but there are times when it's too much with the red crosses. For another of the Death Company I will likely try a deep purple instead - this worked well for Karlaen, and helps keep each member of the Death Company unique.

Green eye lenses are really working on this model too. I was concerned that it wouldn't give the right effect, but it contrasts nicely with the red and really draws attention to the face (at least for now - still much to be painted on the model yet). Death Company come with a lot of detail normally - red crosses, ropes, honour rolls, skull icons, and the usual winged blood drop of the Blood Angels. It can be easy to get carried away, so the trick will be adding just enough to make it interesting without unbalancing or overwhelming the model. It's going to be fun.


-- silly painter.

Wednesday, September 16, 2020

Tyranid Carnifex

 

Carnie the Carnifex.
 

And this is the last of my Tyranid models, hopefully now in a position to sell and then free up storage for something else. Obviously named Carnie, the carnage loving Carnifex.

There's not a whole lot different again from the methods I've been using to paint Tyranids so far, and that's making everything fit together really well as a fully painted army. There are some small additions: Nighthaunt Gloom with Contrast Medium around the sack attached to the left hand, and again as a spot colour on the weapon. Hexwraith Flame is also applied in some areas as hints of venom sacks (not visible in the photo) which ties that into the Tyranid Warriors as well. Otherwise only differences in that it's such a large model.

The model itself I didn't really enjoy too much. It's nice now that it's finished, but the assembly was very problematic. The legs aren't quite flush with the base, and I had to use green-stuff to give additional purchase under the left hoof. It's not noticeable once the texture paint is applied, but I have a concern about how well it's going to hold a fairly heft model. Perhaps I should have pinned it - and I may well do so if it breaks off. Owing to this, I think the torso is angled down more than it should be as well, which in turn affects the positioning of the head.

The arms don't sit quite as I would have liked. The right talon in particular is at a strange angle because the other right arm gets in the way. The weapon arms were a pain to try and partially assemble before painting - and in the end I had to break them apart when gluing to the torso, and then fill in gaps with green-stuff and paint over it again.

The carapace didn't fit together nicely at all, and a lot of gaps were plugged with green-stuff, or misalignment (e.g with the "chimneys") filed back to make them more flush.

Finally: mould lines everywhere! I kept finding them after Volpus Pink coverage, and would either have to carve them back, or try use Wraithbone to make them a little less obvious. That was very frustrating.

I may have to do another post showcasing the entire army (for some small definition of army), but Carnie was definitely a good way to finish the Tyranids. The contrast paints made it much quicker to get the models to an acceptable finish, and a little bit of effort on the carapace makes them really stand out. If nothing else, it was just good to get models done.


-- silly painter.


Tuesday, September 8, 2020

Genestealer Broodlord

 

Freddy the Hunchback
 

The Spawn of Cryptus painted, for no other reason than it was relatively simple and I felt the sudden motivation to try and get the Tyranid models finished.

In terms of paints used, there's no difference to how the Genestealers, or any other Tyranid in general, was done before. Same paints used, although a little more care in places because this is such a centrepiece model:

  • The "skin" was given a Wraithbone glaze after the contrast stage just to give some areas more definition, or because they were too pink previously.
  • Additional blending was done on bones to remove any clear line between them and the "skin". Mostly I wanted it to look like the carapace was slowly hardening more as the creature grew. In some places I started to put a slight purple tint, just to show it turning slowly into the hardened carapace seen on the back. The blending on the "horn" for example shows this in progress.
  • Much finer lines on carapace edges, and some blending back of the purples if the colours were sticking out too much.

-- silly painter.