Thursday, December 17, 2020

Dark Elf Sorceress - Part I

 

This one has a fiery temper.
 

Just for something different, the next model in my Hero Quest remake is the replacement for the Wizard. I decided to use a Dark Elf Sorceress as the main model based on a similarity of pose and because I thought it might be fun to paint. Just one of those models that's fairly simple, but somehow carries a lot of character.

The original idea was simply to copy the reference colours, but at the last moment I decided that I'd give red hair another go, which messes with the entire look of the model and forced me to reconsider basically everything.

The hair didn't quite turn out as red as I'd like. It's more ginger than red. Still, it was a fun experiment. During painting, all brush strokes were kept in the one direction. This helps keep the natural shape and flow associated with hair.

  • Rhinox Hide over all of the hair.
  • Skrag Brown over most of the hair, but concentrating on more raised areas with a second coat, and then a third with the lighter areas. Obviously each coat was quite thin.
  • Deathclaw Brown over more prominently raised areas, with maybe 30% coverage.
  • Cadian Fleshtone on the tips and more reflective areas.
  • Contrast Blood Angels Red, mixed with Contrast Medium at about a 1:4 ratio. This was covered over all of the hair just to give it more of a red tone.
  • Contrast Iyanden Yellow, mixed with Contrast Medium at about a 1:4 ratio. This was applied on the tips and more reflective areas.
  • Reikland Fleshshade in deeper areas, or wherever I felt it was too bright.

The photo isn't quite colour accurate, but it's close enough to the end result. It could use a little more vibrance, and slightly shifted more towards red, but this is why a single model is good to experiment on: it's not like I'm committed to painting a whole army this way.

The rest of the reds are, well, reds. I didn't keep specific notes on purpose, because I wanted to play and make the model unique. One of the best ways to do that is simply just add and mix colours on a palette and see how it goes, but there are still a few points of interest:

The red leather is a brighter red, with highlights that lend towards pink. There's not a whole lot of contrast, and very few desaturated highlights in an attempt to give a gloss appearance.

The NMM red tends more towards orange. Shadowed areas are burgundy mixed with black, with brighter points pink, then glazed with Wild Rider Red (which tends towards orange). This keeps the NMM components distinct from the red leather.

The cloth I intend to keep more towards burgundy, with fairly muted highlights.

There will be some metallics on the miniature, likely the head of the staff.

Skin is primarily Rakarth Flesh at this point, with some very weak shading to give some outline to the sculpt in preparation for next steps.

-- silly painter.


Friday, December 11, 2020

Necron NMM - Part IV

For battlefield repairs, Necrons use strips of gauss.

 Went ahead and finished the Necron model, which was fairly simple to do once the "copper" was finished. There isn't too much colour variation throughout the rest of the model, so relatively few paints were used.

For the inner skeleton structure, the blade of the weapon, and charging coils / heat sinks / whatever on the weapon:

  • Incubi Darkness across the more prominent areas.
  • Thunderhawk Blue highlighted over that.
  • Fenrisian Grey as final edge highlights.
Baharroth Blue was used on the chest piece symbol, mostly because I didn't actually want it to stand out too much. Green would have made for good contrast, but would also have taken focus away from the face. As it is, the gun is doing that perhaps a little too much.

The weapon I had the idea to not paint as a uniform glow, but instead brighter towards one end to indicate power charging up and getting ready for firing. I could have made it a little more exaggerated, but essentially can't be bothered to do more on it now.
  • Administratum Grey over all the glow areas.
  • Ulthuan Grey over about two thirds of the glow area.
  • White Scar over about one third of the glow area.
  • Waywatcher Green (old glaze) across the whole glow area.
  • Hexwraith Flame across about one third of the glow area, or any areas I wanted to nearly fluro in colour.

Standard approach for the rest of the weapon, with Eshin Grey and Dawnstone to highlight around the edges.

Ribbed cabling was Administratum Grey covered with Black Templar Contrast, then using brighter greys from the palette just to highlight some more. I could have pushed the contrast more for NMM there as well, but just didn't think it would have really added much to the model.

The base is the same as for most of everything else: Zandri Dust, Agrax Earthshade, Armageddon Dust drybrushed on top, and Terminatus Stone as a final drybrush step. I was a bit concerned it wouldn't work, but the lighter base complements the darker models tones well enough.

Happy enough with the final result, even if the NMM could have been improved on. At least I learned quite a lot, and the copper tones I think worked out very nicely. Still, I wouldn't want to paint an entire army this way.

-- silly painter.

Sunday, December 6, 2020

Assault Intercessor Death Company (Next)

 

Steady aim, bringing pain.
 

Death Company number four in the assault intercessor range. Not much to say on the model really, everything is mostly the same as it was for the other models except for a lack of Blood Angel specific iconography. That was all painted or added with decals.

In the case of the left shoulder pad, the chapter symbol was a little too large, but I didn't have the proper size available.

The base is entirely from the moulded one supplied with the miniature. The rocks were given a very slight red tone on the base layer before drybrushing. There's a slight difference in appearance as a result, but it should still fit with the the other models overall.

Really enjoyed painting the assault Primaris, mostly because they reach the final assembly phase that much quicker for me.

-- silly painter.



Sunday, November 29, 2020

Necron NMM - Part III

 

Fresh from slumber and ready to shine.

Mostly working keeping me busy, but managed to finish the basic copper armour of this little Necron. Some of it I'm happy with, some I'm not. Nothing wrong with that because I learned quite a lot in the process.

Starting with areas that worked: the hands, the right foot, the pelvis worked ok, the left arm is mostly ok as well. Most of this has something in common: the brightest edge highlights are next to the darkest colour used, giving extreme contrast and the impression of reflection.

The areas that didn't work so well: the chest, legs, and the back carapace was a bit hit & miss. The colours blend together very well, no problems there, but how to apply the contrasting lines needs a lot of practice. I don't really have a feel for it on larger surfaces yet.

I'll continue with some extras on the endoskeleton, possibly using more of a teal colour. I definitely don't want it to stand out too much against the copper, so I might keep it to a darker tone. I'm undecided about the weapon.

-- silly painter.


Thursday, November 19, 2020

Necron NMM - Part II

 

Copper a load of this.

After quite the extended time from painting for personal reasons, slowly getting back at it. It will take a bit longer to start posting regularly again, but at least there's a tiny bit of progress on the Necron.

This step shows the Mournfang Brown and Doombull Brown applied to the main body, which doesn't yet show much of what the final result will be. The latter brown is fairly subtle at this stage, but such subtleties build up.

Hopefully another couple of photos in the coming days to show the progression towards the appearance of the head. I'm not sure if the end result will be quite how I want it - in fact I'm almost certain it won't be, but have to start somewhere with NMM, and a single model like this is a great practice piece. Wouldn't want to do an entire army in this way though.

-- silly painter.


Sunday, October 18, 2020

Necron NMM - Part I


So it's not the best photo, simply for being in a rush the lighting makesthe top of the head darker than it should be, but for my first real experiment in NMM, it's ok. There's a few things gone wrong, a few things gone right, and a lot learned in the process

Rather than be normal and start with a silver, or a gold, I wanted something a little different: copper. As it turns out, copper is really hard to do owing to it being a bit of strange mix of colours. There's reds, browns, hints of orange, pinks, blues, even a bit of white. Still, I'm lucky enough to have a wide variety of paints, and I don't intend on painting an entire army this way, so for a bit of practice it would be fine. Also the Internet is a great resource for getting started with - always do a bit of research first to get off to the best start.

I've decided that NMM techniques are all about two things: contrast and transition. High contrast along edges, and transition across larger surfaces. So I wasn't going to be afraid of using quite a few paints to achieve a nice gradient, which helps reproduce the effect later on. Plenty of water or flow improver was used to make sure the paints were very thin; glaze consistency for the most part. Don't rush, spend some time building up the layers.

  • Mournfang Brown over the entire area. It's worth a couple of thin coats to get a nice, even coverage. This serves as a little darker than the midtone, where it can be lightened or darkened from.
  • Doombull Brown to glaze the areas that should be lighter. The top of the head, the temples, the lower jaw, the bridge of the nose.
  • Tuskgor Fur to further glaze and lighten, just a little less areas covered than before.
  • Squig Orange then glazed to further lighten, and start to really brighten the sharpest edges. 
  • Emperor's Children glazed across yet smaller areas, and edge highlighted to bring out contrast along sharper areas, or where the light is expected to reflect with higher intensity. It's this part where the colours really start to stand out and it might start to look a bit coppery.
  • Deepkin Flesh, chose specifically because it has a very slight blue to it, used for highest intensity reflections. Sharp edges, or highest points in a curve. There is a lot of back & forth between previous colours and here - wet palettes help with this a lot, along with good brush!
  • Barak-Nar Burgundy glazed into the darker areas. This essentially forms a line against the sharper edges, increasing contrast and giving the impression of reflection. I might have used a deeper purple, or a blue, but the burgundy allows me to recover a little if I mess it up and still push it a bit further into blue later on if necessary.

I think this has worked well enough that I'm confident enough to keep going with it across the rest of the model. The main outer armour or carapace surfaces will be copper, and I'm considering a very dark silver, or perhaps a shiny black, for between those areas.

I've yet to decide on the weapon, but the energy glow will either be a green, or perhaps teal, turquoise, aqua.

-- silly painter.


Thursday, October 15, 2020

Horus Lupercal - Part V

Just flapping in the breeze.

 Time again for minor progress on Horus. Mainly I just wanted to jot down some notes on something new now, rather than wait until I've done a lot more and roll it up into a larger post.

Today it's the pteruges hanging from the waist. There's still some work to go on them, but there's enough to actually glue that part into place. I've already done those that fit on near the right shoulder, but they won't be attached until the full arm is ready as well.

I thought about the colour to use for a while and ultimately went with leathery brown, almost the same hue as the filigree edging on the the armour but with perhaps slightly more red to it. The whole idea is that they should not stand out against the upper chest, or eventually the face. I've gone with quite a bit of Contrast in the end:

  • Wraithbone base over the leather areas.
  • Snakebite Leather applied in a thin layer over the top. This is more glaze consistency - don't allow it to pool.
  • Gore Grunta Fur / Contrast Medium (1:2 mix) to again glaze over the area. A second glaze was applied if that wasn't quite enough.
  • Blood Angels Red mixed in with the leftover from the previous step, about a brush load. This was applied to the upper areas just for a little variety, and harmonises very well with the eye jewel on the torso area.
  • Agrax Earthshade applied over most areas, but again not allowed too pool heavily. This step gives greater definition and depth to individual lengths of the leather.
  • Wyldwood was lastly applied very carefully and in very small amounts to give greater depth and darken the areas a little more. Glaze consistency is again key.

I'm not yet fully done, as mentioned. The red needs some shadowing more against the belt, and a few edge highlights here and there wouldn't go astray. Just need to be very careful not to overdo it - it will be very difficult to fix mistakes from this point.

The metal ends I ended up with a more red metallic than the armour. I didn't want the bronzes of the armour, nor the golds on the weapon. Perhaps a different metal was used: gifts from allies, or trinkets made from the salvage of fallen enemies. Using a reddish metal ties it together with some colouring I've started to use on Blood Angels weapons, which again both signifies the closeness that Sanguinius once shared with Horus, and how that changed when Horus turned traitor.

  • Screaming Bell as a base.
  • Cryptek Armourshade to do what shades do.
  • Runelord Brass as a first highight.
  • Canoptek Alloy as a final edge highlight. This is a very light, desaturated metallic and so is best thinned down a little first. It ends up very close to a bright silver (just a little more brass into the mix) and was used directly on the pteruge studs.

There still a little eye jewel to be done as well, and I may end up with Contrast paints once again because this is the sort of area where they're very effective.

-- silly painter.