Wednesday, November 22, 2023

Blood Angels Librarian Dreadnought - Part IV

 

Hey goa'uld, I can do that too!

(There will be grammar and spelling mistakes, but if I don't get this written out now then it'll be another week before I have the chance.)

There hasn't been much time for painting progress, but I have filled in some dreadnought details. This makes the model look far more complete than it really is - there are still arms to do, the power plant, the base, final edge highlights, decals, etc. It's nowhere near complete.

I actually decided to brighten up the edge highlights of the blue. This was just mixing a little more Baharroth Blue into the mix still on the palette and very carefully applying it to the most prominent edges.

Not too much to say about the yellow details. Again, I might highlight the motif on top with more white to give it a more reflective appearance, but that's a step for another time. Averland Sunset, Yriel Yellow, Phalanx Yellow. Same as used on the side cabling, although those were shaded with Agrax Earthshade and Seraphim Sepia.

The keys and Librarium symbol are plain Grey Knights Steel right now, with a slight Drakenhof Nightshade (barely visible). I'll do more of those details after the varnishing stage probably. The background is a little more interesting and was some experimentation with metallics in volume highlights. Warplock Bronze and Balthasar Gold, mixed in varying degrees and glazed. I like how it shows so far, but I'm aware that varnishing will change it considerably. I had intended to see if it would be something that might be suitable for shading, but I don't think I'll use in future - I'll stick with shade paints for the moment in similar situations.

The eyes on the helmet I debated leaving alone, but with more details done it was apparent something needed to draw attention back there. To that end I'm going for a glow effect, but it won't be anything particularly special: white (Corax White here) and a Contrast paint (Aethermatic Blue most likely).

The chained book cover is Lupercal Green. I mixed in a very, very small amount of white to highlight the upper edges mostly to see how the colours would mix rather than for any visual difference; the detail is too small for highlights to be noticeable.

Scrolls and paper used very similar colours to the normal approach for purity seals, but some slight variation:

  • Steel Legion Drab as a base coat.
  • Zandri Dust mixed into the previous colour and built up to pure Zandri Dust for initial highlights.
  • Agrax Earthshade glazed into recessed areas.
  • Seraphim Sepia glazed over selected papers to make them appear more aged.
  • Ushabti Bone built up for further highlights.
  • Pallid Wych Flesh glazed over more as appropriate.

The last steps used a small amount of Lahmian Medium to build up the glaze. Particularly for brighter or whiter colours, using a medium to thin it to glaze consistency gives a much smoother result than water. At a guess, water separates the pigment too much and leads to chalkiness, whereas a flow improver simply thins without changing too much else of the chemistry.

Lastly for the details so far: the winged blood drop icon. I wanted that to be white winged, but not with black shading. Blue is still much more indicative of sky, angelic, heavenly, and so I still wanted blue tinted recesses. To that end:

  • Corax White, with multiple thin layers to get an even, opaque coverage.
  • Apothecary White / Talassar Blue / Contrast Medium in a 1:1:2 mix, and heavily applied all over.

That's all. There's a much greater glow in the photo than in real life, and there's no real need to edge highlight anything. Contrast paints excel at this kind of task. If I were to continue with many more of these symbols I would play with the paints and dilution more, but for now it's ok. I can always knock it back further with Apothecary White later on.

Next steps are to fill in some metallic areas around the torso, perhaps some cabling, and then start to look at next pieces of the model. There will be a general harmonising at the end along with filling in the last details in one go (e.g gemstones) but it's about time to start more assembly.

-- silly painter.



Sunday, November 12, 2023

Blood Angels Librarian Dreadnought - Part III

 

'tis but a scratch!

Back to very little for painting again. This is a little frustrating, but I'll see if I can adjust to take more advantage of the precious free time I have, to be more efficient in my approach. This alone is a shame - I enjoy taking my time to paint a model, but I have far too many to get through to be quite so picky right now.

The metalallic parts are simple enough to need to explanation, and they 're not exactly the focus of the model. I will do more on them later for oil stains, lubricants, that sort of thing, but I'll try not to go overboard. I refer to them as "background framing" and don't really hold the viewer's attention - as a result, they can be rather simplistic without the overall quality of the model diminishing.

The "head" (or helmet, or sensorium, who knows) is a base of Balthasar Gold, some sepia tones washed over that, and highlighted with Gehenna's Gold. Just enough to glue everything in place. I'm still thinking over the eyes and if I'll leave them as they are, or do the whole Librarian psychic eye glow thing. Depends if I'll need to draw more attention there once the other details are filled in.

The blue sarcophagus is the most outstanding visual difference since the last update. I knew I wanted a darker blue, tending to black, in shadows but didn't want the cobalt blue of an Ultramarine for highlights. This keeps Librarians different and their own separate group. I ended up going with:

  • Night Lords Blue / Black (1:1 ratio). I also started moving more towards pure Night Lords Blue in those areas not within shadow.
  • Kantor Blue transitioned as first stage highlight, which was done through a combination of glazing and mixing on the wet palette with the previous paints.
  • Macragge Blue as a second stage highlight. Some care needs to be taken here, and it was again mixed with the previous step first. The real catch is that Macragge Blue is a step up in brightness, but also a deviation in tint from the other blues. It definitely benefits more from glazing for this reason, otherwise it's very difficult to get a smooth transition.
  • Druchii Violet used for recess shading. While I considered Nuln Oil or Agrax Earthshade, The red hint from violet gives a deeper and richer shade without desaturating. Just a fancy way of saying it looks more interesting. Also, Blood Angels. Perhaps a darker green would be suitable for Salamanders or Dark Angels.
  • Baharroth Blue mixed with Macragge Blue for edge highlights. Baharroth Blue on its own is far too much of a colour shift (it has more green in there) and looks completely out of place. An alternative to mixing is to edge highlight with Baharroth Blue, then glaze back over it with Macragge Blue to pull it back into an acceptable range.

For now the edges don't quite "pop" as much as I would like, so I may bump the contrast just a little more after varnishing.

And that's about all for now. Next I will likely start to fill in more details, particularly as the parchment should use very similar colours and should be relatively easy motivational wins. I will plan to simply get a small selection of paints and finish off details as I go around the model (with the arms yet to be properly started!). I'll leave armour edge highlights until after varnishing as that seems to be a good harmonising step.

And the moment I've been dreading is soon here: Legions Imperialis. I don't want to buy masses of those models to just sit in boxes, so I might simply buy one box at a time and paint it up before I allow myself to buy another. It will cost more in the long run perhaps, but it will keep the backlog more manageable.

-- silly painter.


Thursday, November 2, 2023

Terminator Squad - Part VI (Showcase)

 

Astartes Firestarter

Having now finished the Terminators and had a chance to compare before/after photos of the final edge highlighting, I've realised that the difference doesn't really show up on photos. This actually confirms what I suspected: the finish of the paint matters just as much as the pigment, and the lighting conditions and camera sensors have a habit of washing out some of that. The paint is ever so slightly more satin than the matt varnish, which makes the largest difference in the final edge highlight stage. Good to know.

That smile....

Overall I'm not the most impressed with the armour shading. I've done a lot better. I did learn a thing or two about the new approach tried here at least, and that will definitely feed into the next squad. The contrast between highlights and shadows simply isn't enough, but I'm fairly certain I can fix that in future.

With that much armour, quite why a low, stable stance is needed isn't clear.

Edge highlighting at the end has some benefits: it can be seen how the overall model needs to be adjusting. Doing it too early can be a bit of a waste in attempting to show off every single edge. Most often I actually needed to define the bottom of the left pauldron and keep it more distinct from the rest of the arm.
"Space Hulk Stance"

The bases do add some height. It is noticeable compared to other models, but I think worth the effect in also making the Terminators seem slightly larger.
Unfortunately the weapon targeting lens is a bit of a mistake. Not in the colours or technical approach, but it sticks out and draws more attention than I'd like. I should have left them alone here, or made them much darker at the very least. Perhaps one of the darker metallics underneath the gel paint.
More targeting lenses!

One of the more wise decisions was not attempting to paint details in a multitude of colours. Keeping things simple is not only easier to paint, but doesn't clash with the rest of the model. There are a few special details on most models, but they're the exception that proves the rule: less is more. Don't try to make the model "busy", or it just ends up messy.

I bought a Terminator Chaplain (because that model really looks cool), so between these models and that purchase the count is now at 4.5. I'm almost certain to break the count for the upcoming Legions Imperialis, where it's hoped I can paint those things much, much more quickly. I don't go for speed painting, but neither do I intend to put quite as much detail into that smaller scale.

-- silly painter.


Monday, October 30, 2023

Terminator Squad - Part V

 

Marshmellow Man's worst nightmare.

It's been a little longer than I'd planned since the last post, thanks to a few health issues (amongst other things). So these Terminators aren't quite done yet, but they are very close. They've all just been given a matt varnish, leaving some metallics, spots of gloss varnish, a few minor details....and edge highlights.

From the start I've been planning to give these models final armour edge highlights only towards the end of the process. The matt varnish simply dulls everything down too much otherwise. Actually I already applied a "pre-highlight", which now I need to go over again - and yes, this makes everything take that much longer, but still works in batch painting mode.

A note on batch painting: again, this is something generally not for me. I don't batch paint, so it's not actually what I did. I only had three colours (reds) I was using, which stayed on the wet palette, and I did one model at a time over the course of a couple of days. It's the same concept of batch painting, but not done in one sitting. Actually that approach in general was done to bring all the models to a similar level of completion around the same time: the reds, blacks, metallics, purity seals. I just keep the wet palette handy and do the same part of each model at different times of the day. When it comes to individual details, there's actually not a whole lot left over and they can be finished relatively quickly (and with more motivation).

On the heavy flamer for example, I picked out a checkered pattern on the side just to break up the monotony of colours a little. I was inspired by painting schemes of Rogue Trader and 2nd Edition, deciding to give it a little bit of flair. As something unique I was also far more interesting in seeing how it would turn out (bonus for motivation), and with the model already mostly complete I could immediately see if it worked or not.

Ultimately, health issues aside, I think the adjustments to the process have worked, and I'll continue to see how I can tweak my painting pipeline to get through more models without reducing the quality of the finish. I also now have a reference to compare before/after final edge highlights. Hopefully not too much longer and the squad will actually be done.

-- silly painter


Thursday, September 28, 2023

Terminator Squad - Part IV

 

The crux terminatus of the matter.

Free time to paint has been very rare recently, so I'm not getting a whole lot done. As a consequence, posts are becoming fewer and further between - and this one won't be very long at that.

I've managed to finish the bases on the Terminators. They do look much nicer all painted up, and while I haven't yet compared them next to anything else just yet, the paint slightly hides the "standing on a hill" effect from before and makes the older models seem just slightly larger than they are. Only slightly, but I'm hopeful it'll be enough to fit in with the rest of the army better.

I didn't put any effort into the skulls. Wraithbone, Skeleton Horde, highlight with Wraithbone again. I could do more, pick out edges, deepen shadows, and some variation, but really there's not much point. Defined enough, moving on!

Rocks I tried something new with:

  • Mechanicus Standard Grey
  • Agrax Earthshade, notably where rock meets sand.
  • Stormvermin Fur (which ties it into the Zandri Dust of the sand more)
  • Terminatus Stone (of course)

Actually the rocks came out rather well. I need to experiment with mixing other colours for variation - shifting the grey with greens, purples, browns, creams, reds, etc, instead of just monotonous grey.

Nothing else is yet new. I've been painting the blacks, eye lenses, Crux Terminatus icons, etc, all in a batched method. Relatively few paints are involved, and with the wet palette I can just do a little every so often throughout the day. I'm not going to be fancy with most of the smaller details, instead relying on metallics to give them some visual interest. I'm steadily headed into "just get them done" mode, and will get as far as I can with batched painting before switching to individual, unique details. I also want to buy a few new things, so need more models finished first.

Lastly, the armour still hasn't had final highlights applied. I'm holding out there until most other details are done, and I'm expecting it will make the armour "pop" that little bit more without the need to be so precise earlier on in the process.

All told, at least another couple of weeks before these are finished. If I had a couple of days with just a few hours of free painting time then a week easy, but I don't and so at least two weeks it is. That's also very probably going to be my next post, but we'll see.

-- silly painter.


Thursday, September 14, 2023

Jain Zar - Part II (Showcase)

 

That's an impressive pony tail.

It's been a little while since I was last intending to post, but things keep getting in the way right now. I'm having to restructure routines a little bit, so I suspect for the rest of the year painting will be sporadic again, but it certainly won't stop. And despite not getting much else done, I have at least managed to complete Jain Zar.

(note: forgive many spelling and grammar mistakes that will no doubt exist - I need sleep!)

I'll admit that I lost some motivation part way through this model and it took a bit of a change of perspective to get that back and complete it. I basically decided not to care so much about painting precision (which is very much Golden Demon style) and care more about the "feel" of everything. That's not to say I'm unhappy with the model, quite the opposite, but it's not competition level.

Last time I had some trouble deciding on how to paint the various "red" material (cloth, streamers, grips, etc). One of the differences between materials that gives visual clues to how hard the surfaces is, comes from reflections: strong edge highlights, value contrast, bright points, all give an impression of a hardened surface reflecting light. Keeping midtones and shadows, but without much in the way of highlights, will give more of a cloth impression and is exactly what I did for the loincloth. Deepened the shadows with blue mixed with burgundy, increased some areas with Mephiston Red added instead, and that was about it. The hairband increases the light/shadow contrast and has a Druchii Violet wash to help give definition, but the extremes aren't like edge highlights on armour. The streamers are just glaze highlighted with Mephiston Red and not much else.

The handles I thought worked well enough that I might start to use something similar on future models:

  • Barak-Nar Bugundy
  • Druchii Violet
  • Word Bearers Red, focusing more on surfaces facing any light source.
  • Tuskgor Fur, and more prominent highlights.

The hair I like the least, mostly because black hair is difficult enough at the best of times and yet I wanted it distinct from some of the armour. I ended up with:

  • Daemonette Hide lightly brushed over the upper areas.
  • Night Lords Blue mixed in and the lightly brushed over lower areas that still received highlights.
  • Mephiston Red / Dryad Bark (1:1) mixed in again and sparingly added to shaded areas.
  • Nuln Oil to add some depth around where the hair meets other surfaces, e.g around the mask, hairband.

Black armour is semi-NMM heavily influenced from Juan Hidalgo's tutorials:

  • Skavenblight Dinge to place some reflection points and highlights.
  • Stormvermin Fur glazed to increase the value of those points.
  • Administratum Grey for more extreme edges.
  • White for dots of the brights points.
  • Black glazed as appropriate to smooth transitions or darken areas.

The real difference is that the armour is more black than steel. The weapon uses the same colours as I use for Blood Angels black armour, while a little Dark Reaper and Thunderhawk Blue (glazed back where necessary) give the shaft minor visual interest.

The eyes are very simple: Ulthuan Grey, White Scar, and then Aethermatic Blue. It's not enough to really bring focus to the face too much (at least not from the angle the photo is taken), but I'm not entirely sure I want that - I want the miniature as a whole to be the focus, not one individual part of it; it's difficult to get an impression of fluid motion if all the attention is on the mask.

Spirit stones are Mephiston red and Yriel Yellow mixed in various proportions, with the usual black darkened area and a white spot highlight (and then gloss varnish at the very end).

The blades I tried some NMM with. Very similar to the black armour, but swap out Administratum Grey for Ulthuan Grey and shifting everything into the bright grey spectrum rather than black. I played with inks a fair bit as they're very useful for glazing: black for the black areas of course, but a little crimson to reflect the streamers, and green (with a blue tint) for the tri-blades. I also had some of the Night Lords Blue on the palette and so mixed that with Ulthuan Grey and very (very) lightly glazed that on top of the other weapon as a sky reflection. That glaze is really the keystone to it all. There are of course glazes and glazes and glazes to try get some blending going on, during which I realised that very shiny metal quite often doesn't have smooth blends because it's reflecting solid objects with defined borders.

Am I happy with the blade NMM? No, not really, but I can myself starting to understand it more and with practice I'll probably be semi-decent at it one day.

With Jain Zar done, the could should be at 13, however I bought some Assault Intercessors and old-school jump packs while the latter are still available. I just think that combination looks better than the newer design, personal preference. That effectively brings the count back down to just 3. This makes me want to finish the Terminators next while I look around for motivation to get back onto the Dreadnoughts.

-- silly painter.


Sunday, September 3, 2023

Terminator Squad - Part III

 

Chainfist. For when you really want to cut something.

It's been a little while since the last post, what with travel, work, and a bunch of other hobby time intrusions, and sometimes it can be difficult to get moving again on projects. Which is actually something that "background projects" can sometimes help with (at least for me).

I've lost a little steam on the Dreadnoughts and Jain Zar, and the latter in particular is very difficult because I simply don't have the motivation and inspiration to figure out what or how to paint next. The one thing that does help me get over this is to finish a model - a catch 22 when it's the lack of motivation stopping me from progressing. Switching to a background project, such as these Terminators, is what helps get me back on track: there are no surprises in what or how to paint everything. I just need to get it done - and there's the second problem. Getting started again, even without blockers, is sometimes difficult by virtue of not knowing where to start; I want the models done, but don't feel like grinding through it all.

To get some level of progress there visually needs to be a relatively high level of change from minimal painting effort. Metallic details (here I'm trying Iron Hands Steel, though perhaps it's a little too bright - I'll know after the matt varnish stage) are a good way to start - just load some on the palette and work away at each model. I don't need to swap paints around, and each "session" can be just five or ten minutes. I don't need to sit for hours to paint models - quite frequently I only do a small bit over a handful of minutes, then come back later for a few minutes more. That one colour on the palette all setup and ready means I can just go at it the moment I feel motivated.

After the metallics are in place, black paint on any chest Imperial Aquila, chapter symbols, gun casings, just setting the base colour for next steps. I can later go back over again with only a small selection of paints to fill in the highlights and shading - and suddenly the models are starting to look a lot more completed (even if they're not really), and I'm starting to get motivated to do more.

I still need to apply black shading to some recesses on the Terminators, and the I'll likely get one of the most troublesome bits out of the way: black weapon casing highlights. They take a while for me to do properly, and I will really try next time to mask off some of the areas and hit it with the airbrush (or rather hit it with paint sprayed out of the airbrush) to see if that will be more efficient. Still, I'll work at it over the next day or two, and then get started on the Crux Terminatus of each, followed by the eye lenses. Somewhere in there I'll very likely start to pick out pieces on other models and get those projects moving forwards as well.

That's the plan anyway, so I'll see how it pans out in a week.

-- silly painter