Sunday, August 23, 2020

Blood Angel Inceptors - Part II

The "mike drop" stance.

There's really nothing new being done painting wise to these models, so this post is pretty much just a work in progress showing the armour being completed. The only real item of note is covering as much of the metal areas with black first - this makes applying the metallics much easier, even if it takes a bit of time. Othewise the red will show through the metallics, which isn't really wanted in this case.

 

Chest bump!

Corvus Black is still the choice at this point, although I may experiment with Abaddon Black as the metallic undercoat in future owing to how thin Corvus Black naturally is.

 

Platform clogs, now available for battle.

Losing a little motivation with these guys on account of how much they still don't feel like Blood Angels to me. Despite the Blood Angels love of mobility, they are an assault based force, and Inceptors look far too bulky to fulfill that role comfortably. So I don't see myself buying any more of them in a hurry.

 -- silly painter.


Monday, August 17, 2020

Blood Angel Inceptors - Part I

 

I believe I can fly....

Next up on the Dark Imperium Primaris models are the Inceptors. Close support unit. That drops from orbit. And effectively has heavy bolters. For close support. Ok.

It can be guessed that I'm not particularly a fan of the Inceptors as a concept, and even less so for Blood Angels. They simply don't fit the feel of a Blood Angel. A little less bulky, remove the shovel shoes, give them close quarter combat weapons, and then they might be ok.

The helmet is the most visibly striking point of interest, being yellow. Method for this is similar to what was done for the Imperial Fist of long ago:

  • Averland Sunset, with the airbrush.
  • Flash Gitz Yellow, initial highlight with the airbrush.
  • Phallanx Yellow as finial airbrush highlight.
  • Casandora Yellow in recessed areas, just to help outline the shape of the helmet.
  • Fuegan Orange in the deeper recessed areas.
  • Dorn Yellow as edge highlight, typically about the bridge of the "nose" area, and the brow.

Eye lenses are the usual method for Blood Angels. I decided to keep them as a green appearance because it ties all the models together, regardless of general helmet colour.

I've put black rings on the jump pack (or whatever it is) just to add a bit more interest. Gun casings will be black as usual, which should help balance it out a bit more, but I won't know if it works until the model is complete. At least I'm able to reach the fully assembled stage quickly, which might make the next steps a bit faster (still need to apply finishing shades and highlights to the red armour).

-- silly painter.


Sunday, August 2, 2020

Adeptus Titanicus - Imperial Knight - Part V

Stampy is all fired up.

Mr Snuggles says something is about to have a very bad day.

Stompy and his big cannon.

The Imperial Knights, Titanicus scale, are now done. Not too much beyond what was mentioned before, mainly just the banners and, for lack of a better term, rondel shields. The banners are painted in the same manner as the secondary trim colours, except with thinned Black Templar to make them slightly darker.

The decals turned out well. I'm improving with their application; copious amounts of solvent to soften them, and a cotton bud to press them into the underlying shape makes all the difference. There's no real purpose behind the applied decals, I was mostly just playing around.

Photos are a little blurry due to the normal photography area being used for other purposes.

The Purity Seal does dull the metallics quite a lot, but I don't really mind that too much. The colours are still there, the models are protected, and I probably put more effort into them than I originally intended as well. I've learned enough I think that future Titanicus models will be as easy to paint, and may come out slightly better. Whenever I get around to getting them done.

-- silly painter.



Monday, July 27, 2020

Adeptus Titanicus - Imperial Knight - Part IV

Stompy
Although my painting speed has slowed down recently for reasons, I'm still progressing on the Knights. Owing to taking so long, bits of dust have started to appear on the models, which can be seen in the photos because I forgot to brush it off.

Stampy
No change to the basic approach, so this won't be a lengthy post. The only real different is deciding to paint the banners with a base of Stegadon Scale Green, after which I intend to highlight with Thunderhawk Blue (as with the trim colours), but then darken it back down with thinned Black Templar.

Mr Snuggles
Still to come are finishing touches, decals, and a coat of Purity Seal. That last step will dull the metallics, but will protect the models.

-- silly painter.

Saturday, July 4, 2020

Adeptus Titanicus - Imperial Knight - Part III

The Knights go marching one by one.

Some progress on the Knights, although none are entirely finished quite yet. I decided that that main reference model was far enough along that I could starts the others, and hopefully then finish all three at about the same time.

Before going into detail particulars, I've tried to use upper carapace patterning to give simple differences to each, and I may try to further this on the "shoulders" and other larger armour plate areas. They're obviously part of the same House, but differences in markings help reinforce that they're ultimately a collection of individuals rather than a more cohesive military unit.

The bases took me some time to figure out, and in the end I'm still not entirely happy with them, but didn't want to delay further. It makes painting them somewhat easier at this stage if they're glued to a base. In the end I went with concrete road that they're walking down. It implies an urban environment, or industrialised to some degree, is easy to paint (it's just a flat surface), and lane markings help give a sense of scale. I could (and maybe should) add rubble or impact craters at some point, but I also want to not put quite as much effort into painting these models as I do for Blood Angels; I need to paint faster, and the Titanicus models are intended for playing with one day.

Anyway, the road is simple enough to paint:
  • Celestra Grey over the entire base.
  • Administratum Grey layered over the entire base.
  • Dawnstone layered over the entire base.
  • Stormvermin Fur, watered down quite heavily, and painted along each "lane". If roads are looked at, then where cars travel there will be dirt, wear & tear, etc, where tires are constantly passing. This means the centre of the lane is relatively clean, but flanked by colour variation. Brush strokes are always in the same direction when doing this step.
  • Ulthuan Grey for the road markings. I used some specialised masking tape to stencil in the straight lines, but this is only done once previous steps are completely dry. Not all tapes are equal, but anything can be used that doesn't lift up the paint.
  • Black Templar is also being used to give some shadow on the ground. Imperial Knights are large, and will cast noticeable shadows - however this is best done after the model is fully assembled, and I'm still getting this step right. I suspect I will need to work at it a lot more.

Reactor casings, which are on the rear of the models and not seen here:
  • Warplock Bronze
  • Sycorax Bronze
  • Fulgurite Copper

The void shield generators on top:
  • Screaming Bell base.
  • Agrax Earthshade, with two coats probably needed to tone down the base colour.
  • Fulgurite Copper for highlights.
The repetition of Fulgurite Copper here is to convey a sense of those components being more archaic, barely understood technology, as opposed to the brass and bronzes of shell casings.

All cabling is being painted the same. It's not fully done at the time of typing, so this is more of what it will be: something simple as a time saving step. Hazard stripes look nice, but the Imperium likes to standardise equipment, so I'm using that as an excuse to paint all outer cabling the same.
  • Dark Reaper - this may require two coats as it's layer paint.
  • Black Templar (Contrast)

Finally, for the second and third knights I tried to paint with Nuln Oil (Gloss) instead of using Deathshroud. It does not work as effectively, and so future models will revert back to using Deathshroud. It's less precise, but gives a much darker shade to the metallics that just fits better with these models.

-- silly painter.


Saturday, June 27, 2020

Blood Angel Hellblasters - Part III

Blue helmets and overcharged night lamps.

Dark Imperium Hellblaster squad finished. Not quite as quickly as I might have liked, but they're done now.

The plasma coil "glow" is sufficient for line troops, although I'll admit it looks more coloured than glowing. I could do more - highlight edges with more white, add some extra shading to areas, maybe some OSL, but have decided that this is sufficient. Quite why there would be glowing plasma coils I'm not sure - wouldn't it be better to keep an obviously sensitive area of the weapon armoured? Unless it's for a different purpose, such as heat dissipation - but then I've no idea why it would glow. In any case, it does serve to make the squad immediately recognisable. Same reason that blue helmets actually make a kind of sense: a battlefield commander can instantly see where their heavy support options are.

The decals I'm getting better at. There are still some problems once everything has dried, so I still prefer carved icons, but decal skills are useful. Mostly I cover the entire decal with a solvent, wait a little bit, then press it down further with a cotton bud. This helps to really make the decal flush with the surface because the solvent makes it a little more malleable. When that's dry, a coat of Stormshield to protect the decal before covering everything in Purity Seal varnish.

Quite happy with the squad overall though, and looking forward to the next squad now.

-- silly painter.


Wednesday, June 24, 2020

Blood Angel Hellblaster - Part II

Lean, mean, plasma shooting machine.
The first of the Hellblaster squad from the Dark Imperium boxed set is finally finished. No changes in painting from the last post, it's mostly that this time the decals have been added, or an icon hand painted (right knee), and Purity Seal varnish has been applied. Some metallic highlights afterwards as well, of course.

The first model always serves as an excellent reference point, and I think the rest of the squad will turn out well enough based on the Sergeant. My approach to painting Blood Angels (and I do keep a document describing how I do each component, in addition to occasionally looking back over this blog) is slowly being refined, but not much now needs changing. I'm hopeful that I can start to progress a bit more quickly through squads now, though I'm not yet convinced that I can do it in any sort of batch painting process.

The problem with batch painting and myself, particularly where it concerns Blood Angels, is that my desired level for individual troops requires individual attention - and that's not good for bulk model painting.

I'm far more motivated once a model is fully assembled, and it's unfortunate that this rarely happens before a model is nearly completed anyway. That's another point that slows down batch painting - it takes much longer to get all models to the point where final assembly has been done.

All that said, I did try partial batched painting here, so the rest of the squad isn't far off from being done. Painting all the backpacks in one go was a resounding success, and the same for the bases. Painting all the guns at once was a moderate success - but that might not be such a problem if I could paint hands and gun separately. The gun would be far easier to give a basic airbrush initial highlight, and is something that might be feasible for models that aren't push-fit. Painting all the helmets at once however, was definitely another resounding success.

Dance off!

Overall, preparing five models at a time is probably worth it, but I need to be careful about how many models to try paint at the same time.

Just in case I need to reference it again later, the helmets were painted the same as with the Aggressors. Starting with the airbrush:
  • Kantor Blue
  • Macragge Blue first stage highlight.
  • Caledor Sky second stage highlight.
Then fill in the details with a normal paintbrush (this includes Nuln Oil for the breather grill), followed by:
  • Drakenhof Nightshade in various recessed areas, to help pick out the shape of the helmet.
  • Macragge Blue highlight, particularly over edges on the top, rear and sides of the helmet.
  • Caledor Sky for detailed highlight around the top of the breather grill and "brow" of the helmet.
At this point is might be worth mentioning that by painting helmets separately, it does become more difficult to match up against the lighting direction of the final assembled model. In this case I didn't even try: the face of the helmet is highlighted more than the rest, regardless of where the model will be looking.

There is a reason I do this: the helmet is a focal point, and the highlighting keeps the focus there. Lighting isn't just about being physically accurate with painting, it's also about defining the shape and impression of the subject, and by bringing focus around the eye lenses, it gives much more character and life to the model.

-- silly painter.