Sunday, December 25, 2022

Space Marine Heroes 2 - Part VI

 

Whatever the problem, Thunder Hammer is the answer.

Another two of the Space Marine Heroes 2 set have been completed. There are actually more that are very close to being done too, but it will probably be a few more days before I get them finished so decided to make a post now.

The majority of work on these models is, once again, nothing new. The same basic approach that I've been using for Blood Angels for quite some time now, however I may make some adjustments going forward. I'm always on the lookout for small improvements to the process, and in this case it relates to edge highlights and varnishing.

On these two models I decided to reapply edge highlights of Wild Rider Red before the final varnish step. They weren't coming through well enough and I wanted some areas to stand out just a little more, to help give definition to specific areas (notably the helmet). Unfortunately the edge highlighting gets lost a bit again when the matt varnish is applied later, unless there's a very distinct brightness contrast. In future I may therefore apply the edge highlight after the gloss varnish (seems little point in doing it before), and then reapply it along selected edges after the matt varnish. This does take a little longer, but the double step will help keep selected edges more vibrant, while still allowing a lesser highlight elsewhere. Note that this problem only occurs because of the varnishes I'm using and I could opt to simply not varnish, but I still prefer to lock the airbrush paints in place and to use the properties of the gloss varnish to help with recess shading.

Fist is ready to ram down a xenos throat.

I'm also starting to use my fine detail brushes more regularly, which is helping to speed up painting. Combined with the magnifying headset it just makes it much quicker to apply paint more precisely over specific details. Right tools for the job and all that. Another help is that I can rely on the wet palette to mix colours for unique details and just do what I feel like without having to stop and switch paints out. The bulk of each model still follow the basic formula, but details can really slow me down - so being able to just mix paints off the palette without worrying about noting down what I'm actually doing is somewhat more relaxing than normal.

As mentioned above, there are a couple more of the Heroes 2 series that are very nearly completed, which leaves a couple more (still in early stages) before they're all done. Right now the tally of models I can buy is at 9.5 (I bought something else on holiday) and it would be nice to have it at 10 or more before the end of the year. I also have other projects that need attending to, once these Terminators are completed.

-- silly painter.


Sunday, December 18, 2022

Year in Reflection

The Year in Review

Not quite any more models completed yet, although a couple are very close, now that I'm back and recovered I thought a year in reflection was in order. Essentially I want to go back over the year of painting, if I achieved whatever goals I set, learned anything new in particular, and what I plan on doing next year.

Officially I have completed 50 models this year (and two more to be done in the coming days) so on average that makes one model per week, with a few caveats: a good number of the models were actually started last year, and Necrons make up a portion of models done. So while I can fudge the numbers and feel good about, the reality is that I didn't really paint as many as I wanted. There's nothing to really blame: I have been away quite a lot, but at the same time I'm incredibly slow to paint even when I know exactly what I want to do.

The "Project 20 Marines" taught me that I really cannot batch paint. It's just too demotivating to have so many lined up, especially when it's the older tactical squads where every model is as detailed as any characters and requires individual attention. Primaris Marines on the other hand are more similar and I have fewer troubles getting through those. With this in mind, I will very likely keep one or two Primaris on the go at all times as kind of "gap filler" between other projects.

The Ultramarine Lieutenant was a good deal of fun for something different and allowed me to play more with getting a good blue ready for whenever I paint a certain Primarch. The formula worked very well, giving an intense cobalt blue finish, but does rely on the airbrush. Covering up mistakes will be tricky but not impossible, and I'm certain that will be the approach I use on Guilliman. Further on the Ultramarine I attempted to use oils, and I've come to the conclusion that I don't like using oils on miniatures. They simply don't flow as nicely with fine details compared to acrylics (at least not for my experience level with each) and so I intend to stick with acrylics going forward.

Azrakh has not progressed since the last update, however I'm constantly looking at photos; the NMM effect really works on the model and I do want to explore it more. I still think the use of NMM is more limited to anything that looks part of a diorama where the lights sources are more controlled. NMM also helps define details with greater levels of contrast, but also takes an incredible amount of time to get done. I will continue with Azrakh soon enough, but it's a model that will have to be done in small stages. It should be noted that I'm purposefully replicating boxart, something I've grown more comfortable with purely because it represents practice with less mental heavy lifting.

The Crimson Court was a fresh break from Space Marines, letting me explore more organic shapes and the texture of clothing. Painting each in their own style felt more natural than attempting to give them matching colours, and ultimately lead to one of my favourite results of the year: Gorath the Enforcer. The dark moonlight effect really sells that model, and it just goes to show what can be done with a very limited palette. I'm keen to try something similar again, although with different colours, and have Cypher picked out for this.

 Tools

One thing I haven't written much about is any change of tools. I've been impressed so far with the new (white) synthetic brushes from Games Workshop, and they're now my go-to brushes for the majority of my painting. The bristles will form a slight hook as with any synthetic brush, but so far it's been quite manageable. One brush has started to deteriorate slightly, however I'm quite unkind to it and it's lasted far better than any other that's received such levels of punishment.

I mostly keep older brushes around to help transfer paint onto a wet palette now. This is helping to keep the good brushes from wearing out quite so quickly I've noticed, and also helps control how much paint is within the tip; more control of paint on the brush helps with more control over painting.

I've been starting to keep a small drop of flow improver on the palette and using that to thin paints rather than water. The flow properties compared to water are much more favourable with pigment manipulation, and it ends up saving considerable time in trying to get an even coat.

Lastly for tools, I now use a pair of magnifying lenses. They really help see details, and my eyes are not going to get better in the coming years so I'll take what help I can. Coupled with one of the fine tip brushes (a really good sable hair, the artificer series from GW are sufficient for me) and it makes painting details (especially eyes and lenses) so much more pleasant.

Next Year

I'm happy with a few select models forcing my painting skills to improve, and these won't be done in any hurry; I'll finish specialised models in months, not weeks, taking them well into next year. Equally, I want more practice in just getting through models without over thinking them - thus the intent to keep simple models going in the background at all times.

The big challenge for next year however will be some larger "miniatures". I'm dubbing 2023 as "The Year of the Dreadnought". I have many of those war machines to paint up (nine at current count) and I want to finally get some of them done. At least one will also be the focus of some heavy conversion efforts - the old plastic Contemptor variants could use a bit of reposing, despite the effort that will involve.

I'm hopeful that my understanding of the airbrush, coupled with a healthy dose of paint scheme inspiration from around the Internet, will help complete dreadnoughts more quickly than normal.

There is every chance that plans can change of course. I may simply be inspired to paint something else when the next round of models is finished, or travel plans can interfere, and so on. I'm not going to force anything upon myself: if plans start to feel like a chore instead of motivation then they will change.

-- silly painter.


Tuesday, November 8, 2022

A Note on Skin Tones

When I first started to write some of these posts, the entire idea was to keep track of what I was painting and how I was painting it. The how is particularly important when painting up an army: I want to replicate the style across all miniatures in an army to make it look cohesive. The how is also important in learning new techniques, painting theory, etc: I can look into what I've done before and make certain tweaks the next time around. It's this last point that has prompted today's post.

No photos today, apologies, but the camera is being packed away in preparation for holidays.

I'm painting a 3d printed model just for something different, at 75mm scale (whatever that really means!). There's a good deal of skin showing, being the exact reason I chose the model. I wanted to practice skin tones and how lighting works across a body. This is something rarely done with Games Workshop miniatures, which normally show faces, hands, sometimes some of the arms. Exploring more of a whole body on a larger scale will hopefully transfer that knowledge into the smaller scale and improve my painting overall. So that's the intent.

This new model didn't work as I wanted, but then I should never have expected it to. I've learned a lot, and that's what counts. The number one issue is lack of colour variation. I really need to exaggerate the lighting and shadows to give more visual interest, which other than subjectively making it look more pleasing also adds information that more immediately identifies the shape and form of the model. I tend to go with subtle, and subtle gets lost with any sort of distance and ambient lighting.

Particularly across larger models with organic shapes, smooth blending everywhere is hard and takes a lot of time. I've been trying to rush this model, so spending days on a single finger wasn't an option and I relied heavily on the airbrush instead. The colours used:

  • Dryad Bark across the entire model.
  • Barak-Nar Burgundy (normal brush) in some shadowed areas. Ultimately this was lost in the later layer noise (more on this in a moment).
  • Thondia Brown for a general mid tone over most of the model.
  • Mix Deathclaw Brown into the pot, about 1:1 with the previous step and an equal amount of thinner, for initial colouring.
  • Mix more Deathclaw Brown and thinner to add more blended highlights.
  • Mix Cadian Fleshtone and thinner, concentrating on the upper facing surfaces only.
  • Mix Kislev Flesh and thinner, mostly around the face and larger surfaces.

The final skin tone I quite like. The colours themselves make for a tone that I could explore more. The thinner used is also critical: I really got the feeling of building up translucent layers that blend together nicely. This is really something to keep in mind - thin, smooth layers are possible with an airbrush with a little care.

The problem really is that the end result looks very flat. I have tried to go back in and add some shading, add some extra highlights (Baneblade Brown has worked well for that), but it would have given more contrast had I done more of that with the airbrush. Burgundy shadows for example, they were completely covered and very little showed through by the end. I have some plans on how to adjust this approach in future:

  • After the mid tone step, add the shadows more strongly with the airbrush. The shading can also be done with a paintbrush without much thought to blending. Later stages or reapplication of the mid tone can soften shadow edges.
  • The stronger the underlying shadow, the more it will show through later. Very thin airbrush layers will help to keep control of this.
  • Use more colour variation. Even in basic ambient lighting there are subtle reflections off the surrounding environment, and artistically exaggerating this on a miniature often gives a far more pleasing result.
  • Following all of the above, more exploration of pressure on body parts can help too. Crossed legs, hands resting on the face, etc, all can potentially impact blood flow, colour, shape, of those areas. Drawing attention to that gives subconscious visual clues that make the viewer read the entire model far more easily.

Also, headset magnifying lenses with a nice pointy brush is a really great combination.

With that, it's likely to be a month until my next post due to holidays & travel. I'm not taking paints with me, that's far too much hassle. There are terminators, jetbikes, NMM, and more waiting when I'm back; I've not forgotten about any works in progress.

-- silly painter.

 

Saturday, November 5, 2022

Avatar of Khaine - Part III (Showcase)

 

Feeling hot hot hot.

Here is the "finished" Avatar, or at least as much as will be finished prior to transport and final assembly. There is an army to which it will belong, but I don't know how the bases there look, so I'm leaving that alone for now. The left arm is also not glued in place for transport reasons, so the final position will be slightly different.

I've had to rush through this project recently to have it ready in time, and that shows in a few places. The freehand on the loincloth is missing (mostly because I know I'd mess it up), the gemstones are done slightly unusual (there are over 80 in total!), however I think overall it came out ok. The lack of base is letting it down, but otherwise I'm happy enough.

The sculpt itself is both incredibly detailed, and yet strangely simplistic. Most of the body is the magma glow, a few pieces of armour, and a face. There's no real complexity about it. Just a lot of gemstones.

To paint all of the gemstones, I opted for an alternative approach that takes advantage of contrast paints:

  • Ulthuan Grey over the gem. White could be used as well, but I try to avoid pure white whenever I can.
  • Basilicanum Grey over the gem. This is a thinner paint and mostly settles around the edge to give definition to the shape.
  • Black Templar, but applied so that the paint is kind of drawn across the surface to pool in the darker areas of the gemstone. This is hard to describe, and it might take some practice, but it helps in creating a transition.
  • Ulthuan Grey thinly applied to the opposite area to brighten it up again. A second, strong, edge can also help for the next step.
  • Pick your Contrast colour and cover the gemstone. As much or as little as you want.

White reflection dot and 'Ardcoat as normal, and the gemstone is done. Again, this isn't quite as nice a result as using more traditional acrylic paint methods, but it's a lot faster when there's so many to get done.

The armour is also something surprisingly simple:

  • Morghast Bone over the entire armour.
  • Seraphim Sepia as recess shading.
  • Skeleton Horde (very similar to Seraphim Sepia actually) glazed into shadowed areas. Contrast paints work well for glazing.
  • Wraithbone glazed as a midtone and initial highlight, with a second pass for extra highlights.
  • Screaming Skull as a very thin glaze for extra highlights, but this wasn't done much here.

The trick is really using the contrast and shade paints to take advantage of the sculpt's details. With a smoother surface this would actually be much more difficult, but the model has a rougher texture to it that makes it easier to give extra interest to the light and shadow.

And that's the painting highlights. Of course it's not a step-by-step, and there are other areas that I could mention (the greys used for the head and hair for example), but that's all fairly obvious. The paint used doesn't matter, the end result and general colours are more important and visually apparent in the photo.

Final note on the loincloth: that was almost entirely airbrushed. White gives a speckled finish sometimes, and in this case I actually wanted that to make it look more like cloth material and less like vinyl. A very subtle red in places was done to tie it into the rest of the model, as glow reflection from the body, but I kept it to a minimum to not ruin the look.

And now to pack up the model for transport!

-- silly painter.



Sunday, October 23, 2022

Azrakh the Annihilator - Part II

 

Shiny Shoulder Skull

After some experimentation I've managed to come up with an approach that I think works well for my spin on the model. The sheer amount of trim means the NMM is going to take an extraordinarily long time to complete, but as it turns out the majority of the model is red, yellow tinted trim, and grey/silver areas. It's actually a more limited palette than I might have used coming up with my own scheme, which might help nudge progress along every now and then.

I don't intend to get it done in one go. Just work on little pieces here and there over time while getting other models done. The initial experiment is rather obviously on the shoulder pad, and from there I'll just work my way around the model.

The red I had planned before, but the mix of a brown to create shadows simply wasn't working and so I switched that out with black instead. The final mix is thus:

  • Khorne Red base coat.
  • Agrax Earthshade around all the recesses. This will create a fairly thick line around the edges which is just what is wanted.
  • Khorne Red / Abaddon Black 1:1 and glazed into the shadows. Actually the mix can be worked with some more - 2:1 to start with, move to 1:1, 1:2, etc. Glazing or mixing paint on the palette is rarely so precise.
  • Abaddon Black in the recesses, applied as a thin line around all the details to give extra definition.
  • Khorne Red / Evil Sunz Scarlet 1:1 and glazed into highlights.
  • Evil Sunz Scarlet glazed further into highlights.
  • Evil Sunz Scarlet / Wild Rider Red 1:1 glazed very thinly onto extreme highlights just to give even more contrast.

There is a lot of back & forth between all those steps, and a lot of glazing involved to try and get smooth blends. Even now I might go back with Khorne Red in some areas to soften the transitions a little bit more. This approach is not for competitions, and definitely not for tabletop standard. For me, it's essentially for relaxation - I don't have to worry about all the steps to get the model done, it's just something small, limited palette so I'm not swapping paints out very often, and I can just take my time.

The brass trim I've shamelessly taken from Juan Hidalgo, specifically here:

https://www.youtube.com/watch?v=NJiYKAZPswo

I've not repeated all the steps, and I'm leaning towards giving it a thin glaze of yellow for saturation, but otherwise I just followed the formula. In short:

  • Baneblade Brown as a base coat.
  • Ushabti Bone to sketch in higlights.
  • Zamesi Desert / Ushabti Bone 1:1 to soften the transitions some.
  • Baneblade Brown again, glazed to soften transitions more.
  • Gorthor Brown glazed into shaded areas.
  • Gorthor Brown / Abaddon Black / Lupercal Green in a 1:1:1 mix and glazed into deeper shadows.
  • Zamesi Desert / Ushabti Bone 1:1 to highlight the edges.
  • Ushabti Bone to highlight the brighter edges.
  • Ushabti Bone / White Scar 1:1 for the brightest edges.
  • White Scar for final point hightlights.

There is again an lot of mixing on the palette, and it helps to apply in very thin glazes. It takes time. Zoomed in with a camera it also looks horrible, but I suspect that's the lighting at work on the sensor - it looks far better in reality.

I intend to glaze Iyanden Yellow on the central icon to see how it goes. If I don't like it, then it can be fairly safely ignored and I can carry on without it for the rest of the trim. It's going to take months probably to finish, but it will look amazing when done.

No post next week, as I'll be travelling. And after that there's more travel, so posts will very likely become sporadic over the next two or three months.

-- silly painter.

P.S - Iyanden Yellow on the skull looked wrong, but Lamenters Yellow very thinly applied over the brighter highlights works well enough.


Saturday, October 15, 2022

Operative Umbral-Six - Part II (Showcase)

 

You can't see me, I'm hiding.

I'm calling the model done, despite there being nothing added to the base, and despite it being a little more bland on the assassin then I'd normally be happy with. The motivation here wasn't Umbral-Six, but instead the statue they've setup camp inside of.

I was originally going to try some OSL from below, but decided against it because the statue looked too nice to be so easily ruined. Instead I concentrated highlighting from that direction in general, leaving much of the rear darker (happily also meaning I didn't have to spend as much time painting that). I could have spent more time pushing or dulling highlights, but again motivation was in the way and I'm happy enough with a tabletop standard here.

I unfortunately didn't keep much in the way of notes about which paints were used. That's just part & parcel of considerable disruptions right now - I take what opportunities to paint that I can, and anything that's taking time away from that I kind of just don't do. This is a bit of a shame, but also not terribly important in this case: I don't really have any inclination to replicate the model, and so no need to replicate how I painted it.

There is perhaps one exception: the gun casing. That started out with Stegadon Scale Green, and I thought to build it up as a very dark aqua of some kind. Mixing a little dark blue (Night Lords Blue) for shadows, and some Celestra Grey (just happened to be on the palette) for highlights, I later realised the casing looked far too blue. I was painting the assassin separately from the statue, and putting it together resulted in the gun clashing far too much with everything else. The contrast against the gold was inharmonious, and it was very confused against the green tones of the statue. It was simply wrong. In thinking of how to fix this, I remembered the old glaze paints - Waywatcher Green in particular. The glazes were great for shifting colours, and while the Contrast range can do the same thing, I didn't have an appropriate colour there. Two thin coats of the glaze shifted the casing colour into green nicely however, and made it much more coherent with the verdigris. The assassin no longer quite so confusing to the eye.

With this model done, I would normally consider the tally to be 11, however I've just bought Jain Zar and so the tally is back down to 10. The free Warhammer+ model recently is already factored into this, but I might take a double just be certain I haven't forgotten something, so I'll make the tally 9!

-- silly painter.


Sunday, October 9, 2022

Azrakh the Annihilator - Part I

 

Giving someone the finger...with a chainsaw.

After some time away (and a nasty cold still ongoing) I'm finally back to some painting. I decided that I didn't have enough models on the go and started working on Azrakh the Annihilator, simply because it doesn't have much in the way of sub-assemblies, and it's something different. I doubt I'll finish this model very quickly, but it might be just a case of doing a little as I get motivation.

I decided not to use the airbrush here. The trim makes up half the armour anyway, so the airbrush would be of limited value in applying highlights, and the more precise nature of a normal brush would allow me a level of control that I like to use on more special characters. Even so, I perhaps should've done that one base coat of Khorne Red with an airbrush - it took about four thin layers to get a smooth finish, and took far too much time!

I've decided to go with the box art on this model, itself which is based on the original MG artwork. There are particular reasons for this: I want to try my hand at NMM again, and the box art provides an excellent reference point - I say reference, but I fully intend to just copy it. This raises a discussion point that I've seen before: is it ok to simply copy the box art? Yes. I'm not portraying this as my own original work, it's not being entered into any competitions, and it's solely for my own enjoyment. I'm not particularly interested in custom colours and all the colour theory effort behind that either - the model is based on (2D) artwork, and the whole appeal for purchasing this model is to bring that artwork into a 3D representation. The colour planning has been done, the mood of the model has been set, and examples are provided. I want to learn more NMM, and while determining where bright points go is part of that, there is also the topic of which paints to use, experience in blending properly for the effect, and even how to take photos to show it off. I'm still the one applying the paint at the end of the day, so copying the box art is, in this case, entirely ok - all the style hard work as been done and far better than I could do, so I'm going to use that work to more quickly paint up the model. Again, so long as I don't misrepresent it anywhere, it's all fine.

On such topics as which paints to use, the basic red on the armour I intend to shade with a brown, and possibly mix one of the browns with Khorne Red to glaze into shadowed areas. I normally highlight with Wazdakka Red initially, but not yet sure where I'll go from there. I don't want it to be the same red tones as Flesh Tearers, and instead might try to shift it more towards a saturated red rather than the pink that Khorne Red is actually closer to. Reds can be complicated.

Juan Hidalgo has a nice tutorial on NMM brass that I like the look of, and might well try that out on the trim. It's a little more involved than what I was originally hoping, and I might shift it slightly more to the yellow spectrum, but I could possibly also cut a few steps seeing as there aren't large surfaces for multiple gradients; armour trim will need value contrast, but might need fewer precise blends.

As a final note, it can be seen that the model is not stuck to a base for easy handling. This is because some of the areas are hard to reach with a brush, so it will be on some pins for a good long painting time, or at least until the legs are entirely done.

-- silly painter.