Saturday, October 23, 2021

Imperial Navy Marauder Destroyers - Part II

 

If brute force doesn't work, you're not using enough.

A little more work on the Marauders, adding some trim base coats and recess shading. Lots and lots of recess shading. And it's still not yet done.

The camera has a different lens on it right now, so the photo isn't quite as I would like, and travel soon will mean I'm writing this up earlier than it deserves, but it's still nice to see a photo of progress.

Drakenhof Nightshade has been used to border pretty much every panel, shade every rivet, and outline various details. It's precise work, so I've been using a good brush to make it easier but then have to be sure to clean it regularly as I go around the models. And it's still not done: the trim needs shading yet with Coelia Greenshade, and then there's Nuln Oil to apply. I'm also considering a mix of Nuln Oil and Agrax Earthshade to create oil streaks.

In other words, there's an awful lot to do yet, but the most tedious parts are nearly out of the way. Edge highlights are far less demanding, and then detail work will really start to bring the model to life. Recess shading gives outline and definition, edge highlights give some extra contrast, and details create interest.

I'll admit that I'm liking this model a lot more than when I first started. It certainly has some character about it, and I'm looking forward to putting the two I'm painting on display next to the Thunderbolts.

-- silly painter.


Sunday, October 17, 2021

Imperial Navy Marauder Destroyers - Part I

 

Marauder "Lancaster" Destroyer

Hot on the heels of the finished Allarus Custodians, it's time for a bit of a change of pace by going back to Aeronautica Imperialis and finishing off the models I have for that - a couple of Marauder Destroyers. I wanted the motivational win of having done all models for a particular specialised games, and something not Space Marines (Project 20 is still ongoing in the background).

I'm also wanting to clear space for whenever the plastic Thunderhawks are released.

Fortunately the Thunderbolts provide an excellent reference for the colours to use, so there shouldn't be any particular difficulty in that department. Actually the most difficult part is going to be what should be metallic and what shouldn't.

So far not too much has been done:

  • The Fang base coat (a spray can was available for this purpose and saved a good deal of time).
  • Russ Grey to highlight panels with an airbrush.
  • Fenrisian Grey to highlight the underneath of the aircraft.
  • Death Shroud to make a few oil stains. I may have to increase this a little more later on down the line as it's not quite as visible as I'd like.

I've started to block in some metallic areas and already placed some decals as well, although they won't be sealed fully until a much later step. The silver colouring will likely take the longest of everything with these models, but I have to remember that the varnishing will dull them down somewhat.

These models also come with a peculiar problem: lack of components. There's enough space for eight missiles (four under each wing), yet none are included in the box. This seems to have been an oversight during design and production, but luckily I kept the spares from the Thunderbolts and there are just about enough to make up for it. Some missiles will be "against the rules", but look close enough that it shouldn't be an issue once glued in place with the rest. It's kind of annoying that not everything was included, but then I'm not too disappointed because fewer spare parts are now going to waste, so it balances out in the end.

-- silly painter.


Tuesday, October 12, 2021

Allarus Custodians - Part IV (Showcase)

Shoulder pads that are nigh Exterminatus-proof.

 Well I managed to get them finished a little bit quicker than I originally anticipated, if later then I wanted. They were both easier and more difficult to paint than I was thinking when I started, with the difficulty ultimately coming down to subtle decisions about precisely which colours to use where, and what scheme to go with. Ultimately I'm satisfied with the gold - it's different from how I paint Blood Angels, yet still golden armour and something that would hopefully transfer onto the rest of my Custodes (one day).

I'll begin with the base. Unusually for a photo, I decided to show how I was holding the models in place one I had glued them to the base - and yes, Blu-Tac, or whatever derivative/alternate name. During previous steps I had notice that the bases bent ever so slightly when clipped into the holder and was concerned that this might crack the superglue keeping everything in place. So I had to improvise. Not the best, but didn't have much further to go and so it was...alright.

I tried the now infamous "wet-wipe" approach to a marbling effect on the bases, first trying it out on some thick cardboard. Black undercoat, cover with a pulled wet-wipe, followed by Russ Grey and Wraithbone. At this point I'd decided it wouldn't work for me with the bases directly, but enough places on the cardboard seemed good enough that I could use it directly. I also didn't want single pieces, so cut it up into squares, superglued these onto the bases to form marble tiles, and then trimmed the edges to fit. I also thinned down some blacks on the wet palette to add some more distinct lines in places. Ultimately it's good enough, but in future I may well go back to just doing everything by hand. The wet-wipe approach does serve as a good reference to work from however, which is worth considering too.

Ropes are a muted white, and I decided this was good enough. I didn't want them too bright lest they start to look reflective:

  • Base of Celestra Grey over all the ropes.
  • Basilicanum Grey Contrast over that.
  • Using a thin brush, highlight the ropes again with Celestra Grey.
  • Ulthuan Grey applied with a fine tipped brush to complete the highlights.

Pteruges had an edge highlight of Doombull Brown mixed with Evil Sunz Scarlet and stippled / striped in key places. I never wrote down what was done before that unfortunately - some browns, highlighted with rust tones, before the final look. Not terribly impressed with how they all turned out so no great loss - I'll try again next time and come up with something else.

Leather straps are borrowed from a previous model:

Thondia Brown over the leather areas.

Gorthor Brown used for some highlighting.

Gorthor Brown / Celestra Grey (1:1) mixed and used for scratches and general wear and tear lines.

Thondia Brown / Abaddon Black (1:1) thinned heavily and added to recessed areas, just because I was too lazy to dig out the Agrax Earthshade for what would be the same effect.

The top knots were quite simple in the end:

  • Mephiston Red over the entire top knot.
  • Wild Rider Red to highlight some areas.
  • Carroburg Crimson to shade the entire area.
  • Wild Rider Red to highlight important areas more, if required.
  • Flesh Tearers Red Contrast applied to generally darker areas, and then feathered out from there.

These are impressive models, no two ways about it. They each have a lot of character about them, and the armour is festooned with detail. Quite glad I'm finally able to add them to the "finished" collection, but there remain many more of their brethren to paint up yet.

-- silly painter.


Sunday, October 3, 2021

Project 20 Marines - Part III

Watch your back...pack.

 This is going to be another very short post, and as fair warning it might be a little random. There will also very likely be no post next week, but after that I hope to have a few things picking up again.

Anyway, that out of the way: backpacks are fully airbrushed. These included a pre-edge highlight step to see how the final highlight of Evil Sunz Scarlett would turn out over the top. In the photo the edges are visible, barely, but do not clearly stand out. I'm pretty much ok with this, and will definitely try to reapply a thin edge highlight again in select places. Is this worth it in the long run? Well....maybe. It's going to take a lot longer, but I think it's actually worth it for me. I like some edges being subtly defined, and this will help. So I'll stick with it and see how it goes.

Next step will be to add some recess shading, then the metallics (at least as far as the pre-varnish stage).

On the subject of varnish, the local weather has not been particularly conducive to correct drying of Purity Seal lately and I looked around for an alternative. I wanted something where frosting would be less of a problem, and the only real option is the airbrush. I also use the varnish to help seal decals and make them look part of the model, so ideally a matt varnish as well. To that end: Vallejo Premium Colour Matt Varnish. I've given it a quick test on a couple of models and it's held up fairly well so far, but the real test will be the twenty marines in progress right now. I'll also need to be really sure to clean out the airbrush as soon as I'm done with the varnish.

Don't forget decal softener when working with decals. A bit of softener and a cotton bud helps to keep the decal moulded to the surface, which makes the varnish step work much nicer.

As a final random note for this post: I've finally found a use for old paint bottles. Remove the lids, cap with plastic bottle lids (ones with a flat top), and then use a cross pattern of tape to keep the lids secured, and there are little holders for models while airbrushing them. I normally use blu-tac (or equivalent) to hold a model in place for this, but having that holder just means my fingers aren't in the way while using the airbrush. These are no match for a Citadel painting handle (the original variant) but also don't need the model glued to a base, no pinning is required, and are really only intended for the airbrushing step. All built from materials that would otherwise go into the bin.

I have other models in the background being painted as well, but they're not far enough along to do another post on just yet, which is partially why I'll take a week break before showing something a bit more interesting.

-- silly painter.

 

Saturday, September 25, 2021

Lumineth Vanari Auralan Warden - Part III (Showcase)

 

Early toothpicks were dangerous to use.

A bit of a jump in steps, but the model was always about playing with, not replicating. Plus I wanted to just finish something to get motivation up, so this was it. I did not bother with being perfect, cut several corners (the eyes in particular could have a lot more work done, gemstones were done using technical paints only and without shading or anything), and generally consider it tabletop ready only. Really trying to save caring more for special characters. Or just Blood Angels in general.

The main idea behind this model was a more limited palette and seeing what differences I could show in texture. White on the cloth and armour panels, blues much the same. The "scales" were a mix of greys. I also tried a little NMM in places using an unusual combination:

  • Thondia Brown (actually the base brown used everywhere on the model).
  • Wild Rider Red on highlighted areas.
  • Yriel Yellow glazed over most of the "metal", and then built up more on brighter points.
  • Yriel Yellow mixed with some white on the palette for spot highlights.

I kind of like how that gold came out in the end. The brown base works here, giving it a neutral gold rather than shifting to any cold or warm spectrum in particular.

Tassels were a simple combination of Wild Rider Red shaded with Carroburg Crimson. Such small details don't need more, but I wonder if that would provide a good foundation for the top knots on the Allarus Custodes. It's worth thinking about.

And of course the varnish spray frosted slightly and really messed up a few areas, so in future I'll really have to look at a varnish that can be fed through an airbrush.

-- silly painter.


Sunday, September 19, 2021

Project 20 Marines - Part II

 

Colour-of-Dried-Blood Angel

It's been slow going with painting projects lately, just until I get a few things sorted out and free up some time and motivation. This post is nothing particularly special, and mostly just to ensure a few notes are kept about the Primaris assembly.

All of the planned twenty marines are now sufficiently assembled to start painting. It took some time to figure out the best approach the for Primaris models: the weapons are not separate from the arms. In the end I decided it best to assemble the arms fully onto the weapons, then allowing the shoulder pads to be glued into position, but keeping the arms only blu-tac'd in place for now. This allows the arms to remain in position for the airbrush stages, also keeping the shoulder pads with the same highlight direction, but easily removed later for easy access to chestplate and weapon painting.

I've yet to decide if various airbrushing stages should be done without and with the arms, or if various areas can be touched up with some Mephiston Red glazing later on.

As a further step from painting the backpacks, I'm experimenting with doing edge highlighting before the final airbrush highlight. I generally don't do much hard edge highlighting anymore and it's hoped that this will allow a softer but still defined edge highlight that I can then strengthen in areas as needed. I've done a single test model in this manner and it's worked well enough so far. The rest of the backpacks need doing yet, but a wet palette means I can just do one at a time whenever the motivation strikes.

For something completely different, getting something to hold each model has been another challenge. I don't particularly want tens of painting handles, but would like something to hold the models while airbrushed. To that end: plastic bottle caps glued onto old Citadel paint pots. It's not perfect, but does the trick. Once the airbrushing is done I can then glue each model onto its proper base and use the painting handles from there.

-- silly painter.


Saturday, September 11, 2021

Allarus Custodians - Part III

 

The Caped Custodian.

After a little bit of a getaway, I'm back and picking up the brushes again. So while not a whole lot of progress has been done since last time, there are enough little pieces to note down what has been done.

To start with, the armour has been highlighted on this model. It doesn't really look that way in the photo, and indeed it's subtle, but sometimes subtle stands out more. I toyed with a few things but ended up with:

  • Canoptek Alloy / Liberator Gold (1:1) mix for an initial highlight, mostly along "feathers" of the various eagle designs, and edges. Liberator Gold alone has the wrong hue and doesn't match the gold armour, so here it's mostly used to saturate the Canoptek Alloy slightly.
  • Canoptek Alloy for edge highlights, or anything that should stand out in particular.

For what I take to be either shield generators, or some kind of power reactor on the back:

  • Warplock Bronze base coat.
  • Castellax Bronze to highlight, with a fair amount of mixing with the previous colour to get the transitions just right.
  • Canoptek Alloy for edges.

Obviously I'm enjoying Canoptek Alloy quite a bit here. It's a remarkably versatile paint and can be used for bright edges where a silver simply doesn't fit.

Gemstones I have to guess at. I wrote it down at the time, but have since lost the piece of paper. So this is a guess but should be close:

  • Night Lords Blue across the gemstone.
  • Sotek Green across about half the gemstone.
  • Ahriman Blue as a sort of edge highlight.
  • Abaddon Black, or Nuln Oil to darken the opposite side. This step isn't always necessary, especially for smaller gemstones.
  • Corax White for a reflection dot.
  • 'Ardcoat gloss varnish at the end.

The blues tending more towards aqua are a bit of a running theme for these models: I used Talassar Blue, Aethermatic Blue, a little Baharroth Blue, and some Guilliman Blue (the old glaze paint) for the power field effect on the weapon. I tend to give it more colour towards edges and points, and use stripe motions or drybrushing for a weapon in motion. The model shown here is not swinging his weapon, so it's a smoother appearance.

And the cape. I played around on another model to try get a feel for how to paint soft material, and initially tried stippling, dabbing with a drybrush, and glazing, but in the end most of that was simply wasted. Cloth does not highlight with smooth transitions like hard surfaces, so drybrushing works really well. It also doesn't desaturate from reflectivity, so the choice of highlight colour really matters too. In the end I'm going with:

  • Dryad Bark / Mephiston Red (1:1) through the airbrush, all over the cape. Most of this is going to show through, so two coats to give an even finish might be needed.
  • Word Bearer's Red, drybrushed very gradually and slowly built up in desired areas. Really take some time with this step: rushing will ruin it. Dabbing motions can also be used if the paint isn't quite so dry.
  • Mix a very slight amount of Ulthuan Grey with Word Bearer's Red (and not much at all is needed - if in doubt, use less Grey) and drubrush this onto more prominent folds.
  • Agrax Earthshade stippled, dabbed, and glazed into deeper recesses.
  • Druchii Violet stippled, dabbed, and glazed across mid-tone areas to give some variation.

The capes will be matt varnished before being glued into place. In the photo above it's simply staying there, but isn't yet glued. The varnish step will help to differentiate the texture from metallic gloss that much more.

I'm not sure yet quite how to paint the top-knot. Red as a primary colour seems like it might be suitable, but too bright or saturated and it will take attention away from the rest of the model. There are still small details like the vents on the back that need finishing, the weapons, and various other items of interest. The base I will do as white marble.

In other words, still a lot to go on these models - at least two more blog posts, perhaps even three, but there is progress.

-- silly painter.